The poster sliced its rows in degrees, and Mercator charges more for a degree up north

DRV1650-SR-POSTER-EXPORT, the "too much Antarctica" half. The big-poster renderer
stitches a grid of tiles, each drawn into an EQUAL-HEIGHT slot of the output image, and
it chose each row's latitude band by dividing the degree span evenly:

    latStep = (ne.lat - sw.lat) / rows

Screen height is proportional to ln(tan(pi/4 + lat/2)), not to latitude, so equal DEGREE
bands are not equal SCREEN bands. MEASURED on a -60..75 view in 4 rows: the top band is
37.0% of the true rendered height and was being painted into 25% of the poster; the next
19.7% into 25%; the bottom 25.2% into 25%. Every row is squeezed or stretched, which is
the wrong aspect, and the bands where a degree buys the most pixels are the most
over-represented -- the Antarctica the Driver saw.

Sliced in Mercator y instead, every row is 25.0%, exactly, because that IS the screen
coordinate.

★ THIRD PLACE TODAY FOR THE SAME MISTAKE. A whiteboard chart nearly shipped with a linear
scale into degrees; a measurement harness nearly reported a false threshold by correcting
the wrong axis; and this has been shipping. Treating latitude as a screen coordinate is
the error, the conversion is one line, and it now lives in library/maps/mercator-slice.js
rather than being rediscovered a fourth time.

check-mercator-slice asserts the PROPERTY across five view/row combinations -- every band
an equal share of rendered height, contiguous, covering the span, north-first -- and its
CONTROL is the old code: degree-linear slicing must FAIL the same assertion, which it does
by 12.0 points. Without that control the test would pass on a tree where nothing changed.
A -90..90 view clamps at the Mercator limit instead of going infinite.

NOT FIXED HERE, because it is a product decision and not a defect: the export also asks
for an 8.5x11 PORTRAIT sheet (research-map.vue:1410), so a landscape map is letterboxed
onto a tall page. That is a deliberate default, it is the other half of the wrong vertical aspect, and changing the poster's default shape is a product decision, not a fix.

internal/check-mercator-slice.mjs

@@ -0,0 +1,78 @@
+#!/usr/bin/env node
+/**
+ * check-mercator-slice — a poster's tile rows must be equal on SCREEN, not equal in degrees.
+ *
+ * THE DEFECT (Driver, 2026-09-28): Simple Research's Export → poster "shows too much of Antarctica"
+ * and comes out at the wrong, vertical aspect.
+ *
+ * The big-poster renderer stitches tiles, each drawn into an EQUAL-HEIGHT slot of the output. It picked
+ * each row's latitude band by dividing the degree span evenly — but screen height is proportional to
+ * ln(tan(pi/4 + lat/2)), not to latitude. So equal degree bands are unequal screen bands, and painting
+ * them into equal slots squeezes some and stretches others.
+ *
+ * ★ THE ASSERTION IS THE PROPERTY, AND THE CONTROL IS THE OLD CODE. Every band must occupy the same
+ * share of the rendered height, AND the degree-linear slicing it replaced must FAIL that same check —
+ * otherwise this passes on a tree where nothing was fixed.
+ *
+ * Exit 0 pass · 1 fail.
+ */
+import { resolve, dirname } from 'node:path'
+import { fileURLToPath } from 'node:url'
+
+const ROOT = resolve(dirname(fileURLToPath(import.meta.url)), '..')
+const { equalHeightLatBands, mercatorY, latAtMercatorY, MERCATOR_MAX_LAT } =
+  await import(resolve(ROOT, 'library/maps/mercator-slice.js'))
+
+const fails = []
+const shares = (bands, s, n) => {
+  const tot = mercatorY(n) - mercatorY(s)
+  return bands.map(([bs, bn]) => (mercatorY(bn) - mercatorY(bs)) / tot)
+}
+
+for (const [s, n, rows] of [[-60, 75, 4], [-85, 85, 6], [-10, 10, 3], [20, 60, 5], [-60, 75, 1]]) {
+  const bands = equalHeightLatBands(s, n, rows)
+  if (bands.length !== rows) { fails.push(`${rows} rows requested, ${bands.length} returned`); continue }
+  const sh = shares(bands, s, n)
+  const worst = Math.max(...sh.map((x) => Math.abs(x - 1 / rows)))
+  if (worst > 1e-9) {
+    fails.push(`bands of a ${s}..${n} view in ${rows} rows are not equal on screen: `
+      + `shares ${sh.map((x) => (x * 100).toFixed(1) + '%').join(' ')}`)
+  }
+  // north-first, contiguous, and covering the whole span
+  if (Math.abs(bands[0][1] - Math.max(s, n)) > 1e-9) fails.push(`first band does not start at the north edge (${s}..${n})`)
+  if (Math.abs(bands[rows - 1][0] - Math.min(s, n)) > 1e-9) fails.push(`last band does not end at the south edge (${s}..${n})`)
+  for (let i = 1; i < rows; i++) {
+    if (Math.abs(bands[i][1] - bands[i - 1][0]) > 1e-9) fails.push(`bands ${i - 1}/${i} are not contiguous`)
+  }
+}
+
+// ★ THE CONTROL: the degree-linear slicing this replaced MUST fail the same property.
+const linearBands = (s, n, rows) => {
+  const step = (n - s) / rows
+  return Array.from({ length: rows }, (_, r) => [n - (r + 1) * step, n - r * step])
+}
+const linWorst = (() => {
+  const sh = shares(linearBands(-60, 75, 4), -60, 75)
+  return Math.max(...sh.map((x) => Math.abs(x - 0.25)))
+})()
+if (linWorst <= 1e-9) {
+  fails.push('degree-linear slicing PASSES the equal-height assertion, so the assertion cannot detect '
+    + 'the defect it exists for — it is measuring nothing.')
+}
+
+// The poles are undefined in Mercator; a world view must clamp rather than produce Infinity.
+const polar = equalHeightLatBands(-90, 90, 4)
+if (!polar.every(([a, b]) => Number.isFinite(a) && Number.isFinite(b))) {
+  fails.push('a -90..90 view produces non-finite bands; Mercator is undefined at the poles and must clamp')
+}
+if (Math.abs(polar[0][1]) > MERCATOR_MAX_LAT + 1e-6) fails.push('the north edge was not clamped to the Mercator limit')
+if (Math.abs(latAtMercatorY(mercatorY(41.2)) - 41.2) > 1e-9) fails.push('mercatorY/latAtMercatorY are not inverses')
+
+if (fails.length) {
+  console.error('MERCATOR-SLICE: FAIL')
+  for (const f of fails) console.error(`  ✗ ${f}`)
+  process.exit(1)
+}
+console.log(`MERCATOR-SLICE: PASS — every tile row occupies an equal share of the RENDERED height across five `
+  + `view/row combinations, degree-linear slicing fails the same check (worst band off by ${(linWorst * 100).toFixed(1)} `
+  + 'points), and a polar view clamps instead of going infinite.')

library/composables/poster/useMapPoster.js

@@ -32,6 +32,7 @@
  */
 
 import { ref, readonly } from 'vue';
+import { equalHeightLatBands } from '../../maps/mercator-slice.js';
 import { computeLayout } from './usePosterLayout.js';
 import { engineFor } from '../useMapProvider.js';
 
@@ -240,16 +241,23 @@ export function useMapPoster(getSourceMap) {
       const ne = sourceBounds.getNorthEast();
       const sw = sourceBounds.getSouthWest();
       const lngSpan = ne.lng - sw.lng;
-      const latSpan = ne.lat - sw.lat;
       const lngStep = lngSpan / cols;
-      const latStep = latSpan / rows;
+      // ★ ROWS ARE SLICED IN MERCATOR Y, NOT IN DEGREES, because each tile is drawn into an
+      // EQUAL-HEIGHT slot of the output image and screen height is not linear in latitude.
+      // Dividing the degree span evenly (what this did) squeezes some bands and stretches others:
+      // MEASURED on a -60..75 view in 4 rows, the top band is 37.0% of the true screen height and was
+      // being painted into 25% of the poster, the next 19.7% into 25%. That is the wrong aspect, and
+      // the high-latitude bands — where a degree buys the most pixels — are the most over-represented,
+      // which is the "too much Antarctica" the Driver reported.
+      const latBands = equalHeightLatBands(sw.lat, ne.lat, rows);
 
       let completed = 0;
       for (let r = 0; r < rows; r++) {
         for (let c = 0; c < cols; c++) {
           _throwIfAborted(signal);
-          const tileSw = [sw.lng + (c     * lngStep), ne.lat - ((r + 1) * latStep)];
-          const tileNe = [sw.lng + ((c + 1) * lngStep), ne.lat - (r     * latStep)];
+          const [bandS, bandN] = latBands[r];
+          const tileSw = [sw.lng + (c     * lngStep), bandS];
+          const tileNe = [sw.lng + ((c + 1) * lngStep), bandN];
           hiddenMap.fitBounds([tileSw, tileNe], { padding: 0, animate: false, duration: 0 });
           await _waitForIdle(hiddenMap);
           const tileUrl = hiddenMap.getCanvas().toDataURL('image/png');

library/maps/mercator-slice.js

@@ -0,0 +1,57 @@
+/**
+ * mercator-slice.js — cut a map's bounds into EQUAL-HEIGHT rows, which is not the same as equal degrees.
+ *
+ * ★ THE DEFECT THIS EXISTS FOR (Driver, 2026-09-28, Simple Research's poster export): the poster "shows
+ * too much of Antarctica" and comes out at the wrong, vertical aspect.
+ *
+ * The big-poster renderer stitches a grid of tiles, each rendered into an EQUAL-HEIGHT slot in the
+ * output image. It chose each tile's latitude band by dividing the degree span evenly:
+ *
+ *     latStep = (ne.lat - sw.lat) / rows
+ *
+ * Web Mercator is not linear in latitude — screen y is proportional to ln(tan(pi/4 + lat/2)) — so equal
+ * DEGREE bands are not equal SCREEN bands. MEASURED on a -60..75 view in 4 rows: the top band is 37.0%
+ * of the true screen height and is drawn into 25% of the poster; the next is 19.7% drawn into 25%. Every
+ * row is squeezed or stretched, which is the wrong aspect, and the high-latitude bands — where a degree
+ * is worth the most pixels — are the most over-represented, which is the Antarctica the Driver saw.
+ *
+ * Slicing in MERCATOR Y instead gives 25.0% per row exactly, because that IS the screen coordinate.
+ *
+ * ★ SAME MISTAKE, THIRD PLACE TODAY. A whiteboard chart nearly shipped with a linear scale into degrees,
+ * and a measurement harness nearly reported a false threshold by correcting the wrong axis. Anything
+ * that treats latitude as a screen coordinate is wrong; the conversion is one line and it belongs
+ * somewhere shared rather than being rediscovered.
+ */
+
+/** Web Mercator's y for a latitude, in the same units the projection's x uses (radians of longitude). */
+export const mercatorY = (lat) => Math.log(Math.tan(Math.PI / 4 + (lat * Math.PI / 180) / 2))
+
+/** The inverse: the latitude at a Mercator y. */
+export const latAtMercatorY = (y) => (Math.atan(Math.sinh(y)) * 180) / Math.PI
+
+/** Web Mercator is undefined at the poles; the engines clamp here, so clamp before projecting. */
+export const MERCATOR_MAX_LAT = 85.051129
+
+const clampLat = (lat) => Math.max(-MERCATOR_MAX_LAT, Math.min(MERCATOR_MAX_LAT, lat))
+
+/**
+ * Latitude bands of EQUAL RENDERED HEIGHT, north to south.
+ * @param {number} southLat
+ * @param {number} northLat
+ * @param {number} rows
+ * @returns {Array<[number, number]>} [southLat, northLat] per row, ordered north-first to match a
+ *          top-to-bottom tile grid
+ */
+export function equalHeightLatBands(southLat, northLat, rows) {
+  const n = Math.max(1, Math.floor(rows) || 1)
+  const yN = mercatorY(clampLat(Math.max(southLat, northLat)))
+  const yS = mercatorY(clampLat(Math.min(southLat, northLat)))
+  const step = (yN - yS) / n
+  const out = []
+  for (let r = 0; r < n; r++) {
+    const top = yN - r * step
+    const bottom = yN - (r + 1) * step
+    out.push([latAtMercatorY(bottom), latAtMercatorY(top)])
+  }
+  return out
+}

package.json

@@ -233,6 +233,7 @@
     "check:settled": "node internal/settled-tree-gate.mjs",
     "check:element-bootstrap": "node internal/check-element-bootstrap.mjs",
     "check:map-menu-anchor": "node internal/check-map-menu-anchor.mjs",
+    "check:mercator-slice": "node internal/check-mercator-slice.mjs",
     "check:embed-url-absolute": "node internal/check-embed-url-absolute.mjs",
     "check:setup-order": "node internal/check-setup-order.mjs",
     "check:sfc-parse": "node internal/check-sfc-script-parses.mjs",