LegendMobile now moves both engines' bottom corners to the top of the
map below 768px, so the 30px credit band no longer sits under UPG-100's
bottom controls on a phone. --upg-credit-floor keeps the sheet and the
round menu button there and drops the band, so the batch HUD sits 30px
lower, over the sheet and the button. Desktop is unchanged.
- Simple Research drops the example packet (a UPG-100 zone's, not
something its own view makes) and its takeaway line, which promised a
poster and a prayer packet a reader cannot reach from this map.
- Every tab whose map draws people-group pins (UPG-100, Simple Research,
Prayer Progress, Cities with Internet, Gospel Resources) carries the
approximate-location caveat as its info note (pins.approximate), so
it stays findable where a phone legend no longer states it.
- The Regions comment no longer says China is withheld: China prints.
The gallery bundle grows by about 3.6 KB raw (1.1 KB gzipped) for the pins
catalogue area; the rebuild is in the commit that closes this series.
The smaller world-zoom dots also shrank what a tap hits. The pin click
was bound to the drawn layer, and both engines hit-test a circle at
radius + stroke (about 7 to 4 px at world zoom). An invisible twin,
'upg-pins-hit', now carries the drawn layer's previous ramps, and the
click and cursor handlers bind to it, so a tap selects what it selected
before and only the drawing changes. Both of its opacities are 0; the
stroke's default would otherwise draw an opaque black ring.
The visual gate's "is a pin here?" checks ask the twin, the layer a
tap actually hits. The comment that quoted the size report now
describes it instead.
The layout hides the header's meta slot at phone width (its 56px bar has no
room for it), and the "Hide header" button lived there, so on a phone the
header could not be collapsed at all. A phone-only copy of the button now sits
in the header's end corner (44px, the tabs' corner radius, the same localised
label). The floating "Show header" button brings the header back, as on a
desktop. Wider screens are unchanged.
The comment on minCardPx 150 said who chose two-up. It now keeps the
engineering reason (work like the country posters; at two-up a poster
title is too small to read, and two-up was chosen with that trade shown
side by side) and names no one, so check:no-new-driver-references
passes again.
Template comment only: my-upg-100-list rebuilds byte-equal, and the
tree regenerates unchanged.
Picking a region from the all-regions table, or a country from a region, kept the old scroll
height, so the new page opened at the bottom; the dashboard now scrolls its own container to the
top when the subject changes (switching to the list and back changes no subject and keeps its
place). The region and country maps take the all-regions map's square shape under 768px; the shared
map component keeps its portrait default for the country page.
The ⓘ panel now states that a dot marks where a people is found, not a town or a boundary (noteKey
pins.approximate, the catalogue string the map's pin note used, in all 11 locales), so the caveat
stays available to a reader who asks once the phone legend stops stating it.
Also rebuilds every bundle the MapInfoButton / MapInfo change reaches, as the landing precondition
names them: research-dashboard, dashboard-plus-grid, cities-internet, gospel-resources and
doxa-research-map (their behaviour is unchanged: standalone is opt-in), plus doxa-simple-map for the
note. Then tree + SRI.
On a phone the gallery's round ☰ sits in a bottom corner and covered the first ~30px of these maps'
licence credit (the last ~30-40px in Arabic, where it mirrors). The gallery publishes
--map-fab-clearance while the button shows, and every LegendMobile map lifts the engine's bottom
corners by it; these two maps have their own legends, so they never did. They now lift the same
corners, the credit's and a Mapbox wordmark's. The variable is unset without the button, so desktop
is unchanged.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
At rest on a phone the search row sits where the gallery's 44px ☰ circle lands (bottom-left, or
bottom-right in Arabic), so the circle covered the start of the search box. The row now starts at
--map-fab-beside, which the layout publishes only while the circle shows. Everywhere else the
value is 0, so the change does nothing until the circle comes back.
On a partner page or a standalone preset page the ⓘ control rendered nothing, because only the
gallery answered it and the ⓘ's text lived in the gallery's settings. Now the map carries its info
(plugin-designs/doxa-simple-map/src/mapInfo.js) and a host only adds placement:
- MapInfoButton gains an opt-in `standalone` prop. When no host answers and the map carries info, it
asks the map for a popup of its own (the 'standalone' event). If a real host appears later, the
map's popup is dropped and the host takes over. Never inside the gallery (its panes carry
data-doxa-gallery): there the gallery alone decides, its own info:false included.
- MapInfo gains `popupOnly` (with trigger 'control'): no floating button, since the map's control is
the only button; it answers that control from inside the map, points at it once per page load,
and opens the same popup (the bottom sheet on phones). It announces itself as local, so the
control can tell it from a real host.
- Prayer Progress mounts that popup beside its control column, only when asked.
Per preset: the text describes the prayer map, so a map that shows the Prayer tab has info (the full
profile and the prayer preset); the engagement-only and adoption-only presets have none and show no
ⓘ, as before. A host's profile-config info:false removes the ⓘ. Every other MapInfoButton consumer
is unchanged (standalone is off by default).
doxa-simple-map grows by 20,590 bytes raw (5,699 gzipped), for compiling MapInfo. Rebuilt
doxa-simple-map and doxa-maps-spa, then tree + SRI.
The tap hint goes away on the reader's first pin, and it listens for uiStore.selectPeopleGroup,
which this map never calls: it selects through its own refs. A selection here now says so with the
dxmaps:pin-selected event the hint also hears, from inside the map's root. The watch sits after both
refs are declared; above them it would throw at setup.
Rebuilds gospel-resources only, with its pages and the two manifests.
The Regions tab handed the sheet generator its localised card, so an Arabic reader's poster read
"Pray for السودان" and Administrative areas "السودان" beside an English "Countries: Sudan". The poster
is English by recorded decision; the generator now gets the data's own record by id, as the wall does.
Reported from a phone: the pins are "comically large" zoomed out. The
radius ramp began at z=1 (5 px), and MapLibre clamps below the first
stop, so the whole-world view drew all 2,107 dots at 5 px with a 1.8 px
halo. India and Africa became solid blobs, and the zone labels vanished
under them. The old sizing reasoned from one hundred dots; the map draws
every group of every list.
The ramp now starts at z=0 (2.6 px), between all-people-groups (2.2)
and the library's standard ramp (3), and reaches the same 9 px by z=8.
The halo shrinks with it (0.9 px at z=0) but stays solid and dark,
because the dots sit on fills of their own zone's hue.
Measured on the frozen item-5 candidate with this bundle overlaid, at
the gallery's opening zoom (1.5) at 390 and 1440: a pin went from
14.1 px across to 8.3 px (radius 5.25 → 3.05, halo 1.81 → 1.09), about
35% of the area. From z=8 on nothing changes.
Both maps build their map with new gl.Map rather than through useMapInstance, so nothing ever wired the
shared scroll strips for them: on a phone there was no scroll escape at the map's edges, where every
other map has one. They now render the two strips beside the map and hand them to
useEdgeScrollAffordance, UPG-100's pattern, flagged per embed by edgeScrollAffordance (default on).
The strips sit under everything but the canvas, so the licence credit stays on top of them.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The select read 2 while the wall showed one. The shared clamp (210px per
card) forced one column at 390 and silently overrode it. The wall now
opts into PosterWall's minCardPx (150), as the country posters did, so a
phone keeps the columns the reader chose.
Measured at 390, en + ar, with this bundle overlaid on the frozen item-5
candidate: 2 columns (select 2), cards 162px, 0 of 12 action labels
clipped. The poster thumbnails are 114px wide, so a poster's title band
renders about 9px tall (25px at one per row). The title is not readable
at that size; the two-up choice was made with that in view. The
two-line "Show on map" pill and the print options overhanging the card
are PosterWall's own (their fixes are separate).
Select your own territory always found 0 people groups (reported from a
phone). resolveTerritory filed a feature as ADM1 whenever it had a
shapeName. The world ADM0 boundaries now carry one too (Sudan:
{ shapeGroup:'SDN', shapeName:'Sudan', iso3:'SDN' }), so every tapped
country became a province:
- key adm1:Sudan with a null count, and a HUD total of 0 UUPG;
- a Prayer List that refused it: "No people-group data for Sudan —
select the country instead".
The level now comes from where zone-geometry drew the feature. India
states and China provinces come ONLY from the gb-IND/CHN-ADM1 pools, and
only when properties.listId matches the zone, so an ADM1 feature carries
listId; a country never does. A legacy feature with a shapeName and no
iso3 stays ADM1.
Measured at 390 on the frozen item-5 candidate, with this bundle
overlaid:
- tap Sudan → adm0:SDN, 105; tap Chad → adm0:TCD, 53; total 158;
- Prayer List fetches the groups and prints (1 print, no error).
The same flow as served before the fix: adm1:Sudan, 0 UUPG, the refusal,
0 prints.
The filters toggle turned every svg in the button over when the filters were open. So the filter
icon beside the label flipped as well, with its longest line at the bottom, which read as a broken
icon. That shows on a phone, where the grid opens with its filters expanded. Only the chevron turns
over now.
Folded, the legend took three rows of large pill-round controls, about 30% of a phone's page. The
Gap / Resources found buttons are 32px now and squared to the fold button's corners, the search box
is slimmer, and the fold button shares the mode row: two rows instead of three. Open, the legend stops
at 70% of the map and scrolls inside, instead of covering all of it. 32px stays above WCAG 2.5.8's
24px floor. Desktop is unchanged.
Rebuilds gospel-resources only, with its pages and the two manifests.
The ⓘ is now the column's top control, and its one-time pointer runs sideways from it across the
map's top band. On a phone that band is these maps' legend (title and fold button), and MapToolbar's
phone rule put the column at top:72px inside it, so the pointer lay over the legend's title and
buttons. Below 700px the column now starts 8px under the FOLDED legend's measured bottom, whatever its
height in each language. It is measured only while folded and before the toolbar exists, so opening
the legend never moves the controls. Desktop is unchanged.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The research map draws the ⓘ as the first button of its own control column (MapInfoButton), and the
gallery's Simple Research row switches to trigger: 'control' in the same commit, so the tab never
shows two ⓘ, and never shows none. At mount the map tells the gallery that its control is coming, so
the floating ⓘ does not flash while a slow phone loads. A failure or an unmount withdraws that
promise, and the floating ⓘ comes back at once. On a page with no gallery nothing answers, and the
map is unchanged.
Their control column renders only once the map exists, after the data, which can take tens of
seconds on a slow phone. At mount each map now tells the gallery's MapInfo that a control is on its
way (Prayer Progress's announcement), so MapInfo waits for the map instead of flashing its floating
ⓘ first. A failure or an unmount before the map exists withdraws the promise, so the floating ⓘ
shows at once. Gospel's single-card page builds no map and promises nothing.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The ⓘ becomes the first round control in each map's own column (MapInfoButton, as Prayer Progress
has it), and each tab's gallery row says trigger: 'control', so there is exactly one ⓘ: the control.
MapInfo keeps its fail-open, so a page where the control never arrives still gets the floating one.
Rebuilds cities-internet, gospel-resources and doxa-maps-spa, with their pages and the two manifests.
Every map whose ⓘ is its own control (MapInfo trigger 'control') now gets the same pointer:
it shows the first time that control is on screen in a page load, and goes for the rest of the
load once the reader opens the popup or leaves the tab. A full reload shows it again. This is
page-load memory, never storage, so the popup offers no checkbox in control mode: the "Keep
tooltip turned on" box and its string (all 11 locales) are removed, along with the pointerKeep
prop that selected this model per tab. Floating-mode maps keep their stored model and their
"don't point again" box, unchanged.
Leaving the tab is read from the pane (hidden or inert), on the control's intersection change
and the existing 1.5 s measurement tick.
Rebuilt doxa-simple-map (it ships the mapInfo catalogue) and doxa-maps-spa, then tree + SRI.
Prayer Progress draws its control column only once the style and the people-group data are in,
which on a slow phone can take longer than any fixed wait, and then the gallery's floating ⓘ
appeared and was swapped for the control. Now the map announces at mount that a control is on its
way ('dxmaps:mapinfo-pending'), and MapInfo waits for the map instead of a clock.
- A known failure (the map reports an error) or an unmount before the map is ready withdraws the
announcement, and the floating ⓘ shows at once.
- While a control is pending, the 30 s wait becomes a 90 s backstop (time on screen), so an
unreported failure still gets a floating ⓘ.
- A map that never announces anything keeps the 30 s wait, and pages with no MapInfo are unchanged.
Rebuilt doxa-simple-map and doxa-maps-spa, then tree + SRI.
