India, the one large-sheet country, now prints at 5 x 8 ft only, so the
5.5 x 5.5 ft and 3 x 5 ft side-lane cards would have drawn India's 60x96 sheet
under their own label. They now sample the largest drawable countries (China
at 66x66, Sudan at 36x60) through the same shared sheet path, and their
details say that no country prints at this size today
(posterDesign.missing.noCountryAtSize, 11 locales). The 60x96 card keeps
India and stays withheld. check:poster-design-catalogue now checks every
sample: drawable, or withheld by countrySheet.js.
The measure-once design missed a host restyled from sized to height:auto after mount WITH in-flow content: it
stayed sized at its content height instead of getting the floor back, as the old probe did.
- After mount, follow() re-probes only when the reading says the host may have changed kind: floor on and the
host shorter than the floor (styled after mount, or capped), or floor off and the host changed size (it may now
follow its content). The re-probe saves every scrolled descendant (through shadow roots) and puts it back
before the frame paints, so no reader state is lost. A window-height change on a content-sized host still
writes nothing.
- A host capped below the floor (max-height) is latched by the probe that finds it, until it reaches the floor
again, so it is never re-probed in a loop. The 1 s post-flip window is gone.
- check:host-floor gains arm H (sized → auto with 420 px of content: the floor returns, at most one flip, the
scrolled child keeps its scrollTop) and counts re-probes in D/E. Poisons: the old per-resize probe, no capped
latch, no re-check of a sized host, no scroll restore.
- library/elements/hostFloor.js holds the decision ProfileLoader uses: probeOnce() at mount, follow() on every
host resize (reads only; at most one flip of the floor).
- A host CAPPED below the floor (max-height) follows its content up to the cap. It is found at mount, or, if
the cap arrives later, by the host shrinking right after a flip; either way it is latched as content-sized
and never flipped again, so it cannot loop. The post-flip check runs before the collapse rule, so a capped
host with empty content is latched rather than flipped back and forth.
- check:host-floor (gates:pre; self-test in gates:post): a stub DOM with a scrolled child that clamps when the
loader collapses. After mount, host resizes never write the loader nor move the child; a sized host fills;
late sizing flips once; a max-height cap (at mount: 0 flips; after mount: at most one flip and one revert)
never loops; a collapsed host gets the floor back; an inline host is left alone. Poisons: the old per-resize
probe, and a missing latch.
Merge studio's poster type registry + pins-in-state + preview-flag pilot into
the region data fix. Built-output conflicts resolved by taking the pilot's
public/ then rebuilding the three bundles that embed country-posters.json
(country-posters, poster-design, regions-dashboard) on the merged source, so
they carry both the registry changes and the corrected regions. Tree + SRI
regenerated. check-poster-section's dropped 'other' scope and the 18 region-only
records are preserved through the merge.
A regression from the host-sized floor: ProfileLoader re-measured its host on EVERY host resize by briefly setting
the loader's min-height to 0 and then to a huge value. On a content-sized host (100svh tall) a window-height
change, as a phone's URL bar makes, resized the host and ran that probe; collapsing and expanding the loader
clamped a scrolling child's scrollTop, and the embedded UPG-100 app, whose view follows its column's scroll,
flipped from Map back to its first view.
- The two-value probe now runs ONCE, at mount, before the profile renders.
- After that the loader only READS sizes and flips one CSS value: a block host shorter than the floor (only a
host sized from outside can be) turns the floor off; a block host that collapsed to nothing turns it back on;
a window-height change on a content-sized host changes nothing.
Measured headless (390, real touch, a host on a page that scrolls): in the detail view, a drag up from the people
group's floating picture above the sheet scrolled the PAGE (scrollY 0 to 135, en and ar), while the same drag from
the sheet's strip did not. The picture sits outside the sheet and its grab lip, so it had none of their handlers.
It now takes the sheet's capture-phase touch handlers and touch-action:none: a drag from it resizes the sheet (the
grab-zone test holds above the sheet, as for the lip), and a tap is handed back as a click that reaches its
existing @click (open the sheet fully), as before.
scrollTo(paneId) called target.scrollIntoView(), which scrolls every scrollable
ancestor, the embedding page included. On another site, "Map" / "Show on map"
moved the host's own page so that the map's top met the window's top, and a host
shorter than the window then showed its white space under the map. The column
is the scroller (position:absolute; overflow-y:auto) and each pane's
offsetParent, so col.scrollTo({ top: target.offsetTop }) lands the pane exactly
and leaves the page alone.
Reported from a phone (Home and Pray, the people-group detail sheet): dragging the handle down worked until the
sheet became shorter than its content; from then on the page scrolled while the finger kept dragging.
- The sheet and the detail panel's scrollers (.people-group-detail, .detail-content) contain their overscroll,
so a list that reaches its end can never chain a scroll to the page.
- The drag handlers on the sheet and its grab lip listen in the CAPTURE phase, so every touch reaches the drag
first and no child's handler can stop one from being claimed.
A poster plugin now lists its designs in its own <profile>.meta.json under
posterDesign ({ family, name, size, mobileFriendly, labelKey?, instance? },
one or an array). internal/profile-meta.mjs carries the block into
manifest.json only when present, so every existing manifest keeps its bytes
(the built and the dev manifest share that function).
Poster Design's Styles reads the tree's manifest at runtime and gives each
declared design a card under From other plugins: the card says it is made by
its own plugin, and Show full details shows that plugin's page (or preset
page) live, with a link to open it. No plugin code is imported, and a plugin
adding its block does not rebuild Poster Design.
check:poster-design-catalogue now also validates every block, keeps names
unique across templates.js and all blocks, and keeps a names ledger
(src/catalogue-names.json): a shipped name that is renamed or removed fails.
Its new self-test (in gates:pre) proves an invalid block, a name clash, a
renamed ledger name and a missing preset each fail, and the documented
example passes.
Each country's region is set to the live wagf_region its groups carry (file
label spelling); only the region field changes (stats, bbox, count, India row
untouched). The stale 'Other' bucket (18 countries) empties out and each moves
to its real region: USA and the non-Spanish Caribbean + the Guianas to North
America & Non-Spanish Caribbean; Andorra/Monaco/San Marino to Europe; Cocos,
Christmas, Niue, Norfolk, Tokelau, Wallis & Futuna to Oceania. Europe goes
27 -> 30, matching the live Regions dashboard.
check:poster-section drops 'other' from its covering scopes (the bucket is now
empty, so the /regions/other scope resolves to zero countries); the seven real
regions still cover all 175 countries exactly once.
Region-only diff (18 region lines); B25 India withheld unchanged
(check:country-sheet-one-path, poster-section, poster-browser-equiv,
poster-design-catalogue all PASS).
Poster Sections becomes a parameterized profile like doxa-simple-map: its
props (type, scope with 'all' = every region, locale, columns, collapsed)
choose the <dxm-poster-section> sections it renders, and
poster-sections.instances.json lists 20 presets, each built into its own page
and embed snippet in manifest.json:
- country posters: all regions + each of DX Life's /regions regions (8);
- UPG 100 posters: all regions + each of its 9 regions (they show once the
upg100-list type is registered on the page);
- configure: the panel of choices and Copy embed, for making new presets.
The element's columns attribute now comes from the library (landing
separately), so this commit drops its library edits; check:poster-sections
reads columns back through that attribute and passes once it is on the pilot.
- ONE REGISTRY PER PAGE. Every bundle inlines its own copy of posterTypes.js, and <dxm-poster-section> is
defined by whichever bundle loads first, so with a module-level Map that element saw only its own bundle's
types: type="upg100-list" rendered "none" when the country-posters bundle had defined it. The registry now
lives on the page (globalThis.__DXM_POSTER_TYPES__, created once): every copy registers into it and reads
from it; a name registered twice keeps the first (a dev warning; the built-in country is silent); every
registration is announced on window (dxm-poster-type-registered), and PosterSectionView looks again when
its type arrives after it asked.
- COLUMNS (carried from the Poster Sections plugin PR so the element's library lands once): columns="1".."5"
maps to profile-config.columns and to PosterWall's existing columns prop; absent or out of range is
today's default, and a reader's saved per-row choice still wins.
- check:poster-type-registry (gates:pre; self-test in gates:post): two independent copies of the module side
by side, as two bundles on one page; a type registered through one is found through the other; first wins;
announced. The self-test's per-bundle registry fails.
New library/packet/pins-in-state.js: a deterministic pixel-space pin
de-overlap for the whole-India poster that also keeps every pin inside
its own ADM1 state (multipolygon + holes), pulling a pushed-out pin to
the nearest point just inside. Reports displacement, remaining overlaps,
pins-outside (0), and an infeasible list for states too small to hold
their pins — never a silent overlap. Imitates the poster-render pin
relaxation (read, not called). Adds check:pins-in-state (real India data
when present, else a 60x96 fixture; hole/island + poison arms).
A new bundle, plugin-designs/poster-sections, with one profile, Poster Sections.
A panel of choices (poster type from the registry at runtime, region or All
regions, language, posters per row, start collapsed) drives the library's
<dxm-poster-section> elements shown live below it, and Copy embed gives the
bundle script plus the exact tags for those choices, with absolute URLs so they
work on another site. The bundle also registers <dxm-poster-section>, so a site
that loads only poster-sections.js can place the tags.
Library: the element takes a columns attribute (posters per row, 1-5), passed
to the wall's existing columns prop; absent keeps today's default, so existing
importers are unchanged. New catalogue area posterSections in all 11 locales.
check:poster-sections (in gates:pre) reads every panel choice back through the
element's own attribute reader; its self-test proves a builder that drops
columns, drops collapsed, or repeats a region under All regions fails.
previewUnreleased() is import.meta.env && import.meta.env.DEV && globalThis.DXM_PREVIEW_UNRELEASED === true, and the
India tab uses the same expression inline, so every BUILT bundle compiles both away. A page, an embed or a reader's
console setting the global can no longer print the withheld poster from production; only the Vite dev server (the
pilot's Plugin Studio, whose element bootstrap sets it) previews it. posterWithheld()/largeSheet() take the preview
state as an optional argument, so a gate can test an open preview directly.
check:country-sheet-one-path arm G: a global alone does NOT open the preview outside DEV; withheld by default; an
open preview prints 66x66; the India tab is gated on the DEV read; and the built tree mentions the flag 0 times
(the stale ungated build failed this check, as it should). A poison for each.
globalThis.DXM_PREVIEW_UNRELEASED lets a page show what is withheld from the public (the whole-India country
poster). defineMapElement.js, every element's first module, now sets it behind import.meta.env.DEV: true only
under the Vite dev server (the pilot's hot-reload preview), a compile-time false in every build, so the build
drops the line. The built tree, which goes to the research landing and DX Life's /dx-maps, never carries it.
check:preview-flag-dev-only (gates:pre; self-test in gates:post): no file under public/ assigns the flag in any
spelling a minifier writes, and every source assignment is behind import.meta.env.DEV (2 planted defects).
It is not released yet, and the pilot syncs to DX Life (and the partner handoff) within minutes. So WITHHELD.IND is
{ poster: true, rows: true, preview: true }: posterWithheld() is false ONLY when the host page sets
globalThis.DXM_PREVIEW_UNRELEASED === true (the Plugin Studio on the pilot, where it is reviewed); never by a URL
parameter. Every other host keeps the withheld sentence on India's card, and Country Posters' India tab exists only
under that flag. The rows (list, packet, cards) stay withheld everywhere.
check:country-sheet-one-path arm G proves (a) withheld by default and (b) printing at 66x66 with the flag (only
=== true opens it), rows withheld in both, the India tab gated, with a poison for each; check:poster-section arm C
expects the sentence by default.
countrySheet.js WITHHELD now says WHAT of a whole country is withheld: { IND: { poster: false, rows: true } }, with
posterWithheld() and rowsWithheld() (sheetWithheld() keeps meaning the poster, the name Poster Design reads).
- India's whole-country POSTER prints again, 66x66 by default (60x96 and 36x60 on request); largeSheet() names it.
- Its ROWS (the prayer list, packet and cards: about a thousand pages) stay withheld with the same sentence, in the
wall, the Regions list and the 'country' poster type. India's state posters are unchanged.
- Country Posters gains an INDIA tab: the same wall filtered to India, labelled with India's own name in the
reader's language (Intl), between the posters and the map.
check:country-sheet-one-path arm G checks the split (poster live at 66x66, rows withheld, state cards never
withheld, both callers read the right half), with poisons for un-withheld rows and a wall that prints them;
check:poster-section arm C follows. The by-state, leaderless India layout follows as its own PR.
- The post-drag click guard (400 ms) was armed by every drag, but a drag that claimed its touchstart
produces no browser click to guard against, so it only ate the reader's next real tap (a caret tap right
after a drag did not collapse the sheet). It is now armed only for a drag that did not claim its start.
- A claimed touch becomes a drag only past 6 px (a thumb tap moves 1-3 px), so a slightly moving tap on the
caret or the ✕ keeps its click.
- A comment no longer names an internal role.
The section the Country Posters tab draws (a collapsible region head + its poster cards) is now usable on its
own, for any poster set, by parameters:
- library/components/poster/posterTypes.js: a TYPE REGISTRY. A type is an adapter (items for a scope, the
section's title, the print actions). The library registers 'country' (library data + the shared sheet path,
so a withheld whole-country poster stays withheld); plugins register their own types from their own code
(UPG 100 lists, regions, continents later). No plugin code in the library.
- 'country' scopes: a region key in any spelling. DX Life's /regions slug ('latin-america-and-caribbean'),
the API's value, the wall's slug and the English name all reduce to one canonical key.
- PosterSectionView.vue: one section, drawn by a PosterWall in a new SECTION-ONLY mode (no wall head; off by
default, so every existing wall renders as before), embedded so the page scrolls it.
- <dxm-poster-section type scope collapsible collapsed locale assets-base api-base-url is-dark>: the
attributes map onto the standard element's profile-config (posterSectionConfig.js, pure), so it keeps the
per-instance i18n and store. registerPosterSectionElement() from any bundle; Country Posters ships it first.
- country-posters/poster-section: a page showing two sections (Africa open, Oceania collapsed).
- poster.sectionNone (11 locales): an unknown type or an empty scope says so, never a blank.
check:poster-section (gates:pre) + self-test: the registry, DX Life's 8 scopes covering every country once,
withheld India, the attribute mapping, and PosterSection.vue injecting every name its template uses; 3 poisons.
The known collapse-while-scrolled landing is left exactly as it is.
- MapControlMenu dispatches 'dxmaps:panel-close' (composed, bubbling), the twin of 'dxmaps:panel-open', when a
panel closes by ✕, an outside tap or Esc, or is unmounted while open. A host can then hide its own chrome
while a panel is up (DX Life's top scroll strip sat over the Share panel's ✕).
- The mobile legend's resize drag scrolled the page. Only the strip and the title rows carried
touch-action:none, so a drag that began elsewhere in the 44px grab zone let the browser start panning
before touchmove could cancel it, and its later touchmoves were not cancelable. touchstart in the grab zone
now claims the gesture (preventDefault), and a touch that never becomes a drag is clicked on release
(inputs keep their native tap). The height is written once per frame (rAF), and the last frame lands
before the snap.
