The layout hides the header's meta slot at phone width (its 56px bar has no
room for it), and the "Hide header" button lived there, so on a phone the
header could not be collapsed at all. A phone-only copy of the button now sits
in the header's end corner (44px, the tabs' corner radius, the same localised
label). The floating "Show header" button brings the header back, as on a
desktop. Wider screens are unchanged.
The comment on minCardPx 150 said who chose two-up. It now keeps the
engineering reason (work like the country posters; at two-up a poster
title is too small to read, and two-up was chosen with that trade shown
side by side) and names no one, so check:no-new-driver-references
passes again.
Template comment only: my-upg-100-list rebuilds byte-equal, and the
tree regenerates unchanged.
On a phone the gallery's round ☰ sits in a bottom corner and covered the first ~30px of these maps'
licence credit (the last ~30-40px in Arabic, where it mirrors). The gallery publishes
--map-fab-clearance while the button shows, and every LegendMobile map lifts the engine's bottom
corners by it; these two maps have their own legends, so they never did. They now lift the same
corners, the credit's and a Mapbox wordmark's. The variable is unset without the button, so desktop
is unchanged.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
At rest on a phone the search row sits where the gallery's 44px ☰ circle lands (bottom-left, or
bottom-right in Arabic), so the circle covered the start of the search box. The row now starts at
--map-fab-beside, which the layout publishes only while the circle shows. Everywhere else the
value is 0, so the change does nothing until the circle comes back.
The tap hint goes away on the reader's first pin, and it listens for uiStore.selectPeopleGroup,
which this map never calls: it selects through its own refs. A selection here now says so with the
dxmaps:pin-selected event the hint also hears, from inside the map's root. The watch sits after both
refs are declared; above them it would throw at setup.
Rebuilds gospel-resources only, with its pages and the two manifests.
The Regions tab handed the sheet generator its localised card, so an Arabic reader's poster read
"Pray for السودان" and Administrative areas "السودان" beside an English "Countries: Sudan". The poster
is English by recorded decision; the generator now gets the data's own record by id, as the wall does.
Both maps build their map with new gl.Map rather than through useMapInstance, so nothing ever wired the
shared scroll strips for them: on a phone there was no scroll escape at the map's edges, where every
other map has one. They now render the two strips beside the map and hand them to
useEdgeScrollAffordance, UPG-100's pattern, flagged per embed by edgeScrollAffordance (default on).
The strips sit under everything but the canvas, so the licence credit stays on top of them.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The select read 2 while the wall showed one. The shared clamp (210px per
card) forced one column at 390 and silently overrode it. The wall now
opts into PosterWall's minCardPx (150), as the country posters did, so a
phone keeps the columns the reader chose.
Measured at 390, en + ar, with this bundle overlaid on the frozen item-5
candidate: 2 columns (select 2), cards 162px, 0 of 12 action labels
clipped. The poster thumbnails are 114px wide, so a poster's title band
renders about 9px tall (25px at one per row). The title is not readable
at that size; the two-up choice was made with that in view. The
two-line "Show on map" pill and the print options overhanging the card
are PosterWall's own (their fixes are separate).
Select your own territory always found 0 people groups (reported from a
phone). resolveTerritory filed a feature as ADM1 whenever it had a
shapeName. The world ADM0 boundaries now carry one too (Sudan:
{ shapeGroup:'SDN', shapeName:'Sudan', iso3:'SDN' }), so every tapped
country became a province:
- key adm1:Sudan with a null count, and a HUD total of 0 UUPG;
- a Prayer List that refused it: "No people-group data for Sudan —
select the country instead".
The level now comes from where zone-geometry drew the feature. India
states and China provinces come ONLY from the gb-IND/CHN-ADM1 pools, and
only when properties.listId matches the zone, so an ADM1 feature carries
listId; a country never does. A legacy feature with a shapeName and no
iso3 stays ADM1.
Measured at 390 on the frozen item-5 candidate, with this bundle
overlaid:
- tap Sudan → adm0:SDN, 105; tap Chad → adm0:TCD, 53; total 158;
- Prayer List fetches the groups and prints (1 print, no error).
The same flow as served before the fix: adm1:Sudan, 0 UUPG, the refusal,
0 prints.
The filters toggle turned every svg in the button over when the filters were open. So the filter
icon beside the label flipped as well, with its longest line at the bottom, which read as a broken
icon. That shows on a phone, where the grid opens with its filters expanded. Only the chevron turns
over now.
Folded, the legend took three rows of large pill-round controls, about 30% of a phone's page. The
Gap / Resources found buttons are 32px now and squared to the fold button's corners, the search box
is slimmer, and the fold button shares the mode row: two rows instead of three. Open, the legend stops
at 70% of the map and scrolls inside, instead of covering all of it. 32px stays above WCAG 2.5.8's
24px floor. Desktop is unchanged.
Rebuilds gospel-resources only, with its pages and the two manifests.
The ⓘ is now the column's top control, and its one-time pointer runs sideways from it across the
map's top band. On a phone that band is these maps' legend (title and fold button), and MapToolbar's
phone rule put the column at top:72px inside it, so the pointer lay over the legend's title and
buttons. Below 700px the column now starts 8px under the FOLDED legend's measured bottom, whatever its
height in each language. It is measured only while folded and before the toolbar exists, so opening
the legend never moves the controls. Desktop is unchanged.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The research map draws the ⓘ as the first button of its own control column (MapInfoButton), and the
gallery's Simple Research row switches to trigger: 'control' in the same commit, so the tab never
shows two ⓘ, and never shows none. At mount the map tells the gallery that its control is coming, so
the floating ⓘ does not flash while a slow phone loads. A failure or an unmount withdraws that
promise, and the floating ⓘ comes back at once. On a page with no gallery nothing answers, and the
map is unchanged.
Their control column renders only once the map exists, after the data, which can take tens of
seconds on a slow phone. At mount each map now tells the gallery's MapInfo that a control is on its
way (Prayer Progress's announcement), so MapInfo waits for the map instead of flashing its floating
ⓘ first. A failure or an unmount before the map exists withdraws the promise, so the floating ⓘ
shows at once. Gospel's single-card page builds no map and promises nothing.
Rebuilds cities-internet and gospel-resources, with their pages and the two manifests.
The ⓘ becomes the first round control in each map's own column (MapInfoButton, as Prayer Progress
has it), and each tab's gallery row says trigger: 'control', so there is exactly one ⓘ: the control.
MapInfo keeps its fail-open, so a page where the control never arrives still gets the floating one.
Rebuilds cities-internet, gospel-resources and doxa-maps-spa, with their pages and the two manifests.
Every map whose ⓘ is its own control (MapInfo trigger 'control') now gets the same pointer:
it shows the first time that control is on screen in a page load, and goes for the rest of the
load once the reader opens the popup or leaves the tab. A full reload shows it again. This is
page-load memory, never storage, so the popup offers no checkbox in control mode: the "Keep
tooltip turned on" box and its string (all 11 locales) are removed, along with the pointerKeep
prop that selected this model per tab. Floating-mode maps keep their stored model and their
"don't point again" box, unchanged.
Leaving the tab is read from the pane (hidden or inert), on the control's intersection change
and the existing 1.5 s measurement tick.
Rebuilt doxa-simple-map (it ships the mapInfo catalogue) and doxa-maps-spa, then tree + SRI.
Prayer Progress draws its control column only once the style and the people-group data are in,
which on a slow phone can take longer than any fixed wait, and then the gallery's floating ⓘ
appeared and was swapped for the control. Now the map announces at mount that a control is on its
way ('dxmaps:mapinfo-pending'), and MapInfo waits for the map instead of a clock.
- A known failure (the map reports an error) or an unmount before the map is ready withdraws the
announcement, and the floating ⓘ shows at once.
- While a control is pending, the 30 s wait becomes a 90 s backstop (time on screen), so an
unreported failure still gets a floating ⓘ.
- A map that never announces anything keeps the 30 s wait, and pages with no MapInfo are unchanged.
Rebuilt doxa-simple-map and doxa-maps-spa, then tree + SRI.
The dashboard header gains an info button ("What can this map do for you?") to
the left of Share. Both are rounded squares at the vertical tabs' radius
(--vtl-radius), matching the app's own roundedness; map controls stay round.
Built as a reusable, parameterized header-button form so other dashboards adopt
it by prop, not by copy:
- MapControlButton: new shape="rounded-square" (border-radius: var(--vtl-radius,8px)).
- ShareButton / MapInfoButton: a shape prop forwarded to MapControlButton;
ShareButton also squares its rotating ring so a round ring never wraps a square.
Defaults stay 'round' — every existing consumer is unchanged in behaviour.
- research-dashboard DashboardTopBar mounts the ⓘ and Share as one header-button
group, sized to the bar with the 44px tap target kept for both. DOM order
[ⓘ, Share] puts ⓘ at the logical start: left in English, right of Share in
Arabic (the flex row reverses under rtl).
- doxa-maps-spa dashboard-plus-grid tab -> trigger:'control', so the tab's
MapInfo is driven by the header ⓘ and the gallery's floating ⓘ is suppressed:
exactly one ⓘ, fail-open. No new strings (reuses mapInfo.open, 11 locales).
The control column goes back to the library's round, spaced buttons at every width; the square
grouped card read too compact, on phones most of all. The ⓘ stays the top control.
In control mode, MapInfo no longer shows its floating button before the map's control has
announced itself. The map draws its column only once it is ready (style and people-group data),
so the floating ⓘ appeared for a moment and was then replaced by the control. The wait is bounded
at 30 s of time on screen, counted only while the pane is visible and not inert: measured column
arrival times run from 7 to 19 s on a local serve, so a shorter wait expired inside a normal load
and flashed late. If no control arrives, the floating button shows, so there is still always a way
to open the popup. Once a control has announced itself, measurement alone decides, as before.
MapInfo's plain <script> block (the page-load pointer memory) now sits above <script setup>, so
check:setup-order no longer reads it as used before its definition; its explanation moves into
<script setup> so the library index keeps the component's own description. Compiled output is
unchanged by the move.
Rebuilt doxa-simple-map and doxa-maps-spa (the only bundle that compiles MapInfo.vue), then
tree + SRI.
- Prayer Progress's column becomes the engine's square grouped card (controls="square"). Its first
control is MapInfoButton, which opens the gallery's MapInfo for the tab. The gallery's tabInfo
'prayer-map' entry now uses trigger 'control', so the floating button hides while that control is
on screen, and shows again (fail-open) whenever it is not.
- MapInfo, control mode: the first-visit pointer now points at the control. Its place is measured
against the pane (which scrolls) and goes on the control's physical inner side, so an Arabic page,
whose column mirrors to the left, gets the pointer on the right with the arrow reversed. It shows at
every width: the under-1200px rule was measured for the floating pointer crossing each tab's top
strip, and does not apply here.
- MapInfo, pointerKeep (prayer-map only): the popup offers "Keep tooltip activated" instead of the
every-map "don't point again" box. It is off by default, and opening the popup retires the pointer.
Checked, the pointer keeps showing on every load. It is stored per map.
- mapInfo.keepPointer in all 11 locales.
- Rebuilt doxa-simple-map and doxa-maps-spa, then tree and fix:sri.
The country poster previews were the dense layout -- small facts table, both
vision columns, a smaller map -- while every UPG-100 thumbnail is SPARSE. Now
that the click-time print is SPARSE too, the stored country previews have to be,
or the card and the print disagree.
Generated with SPARSE=1 and checked BEFORE any browser time:
· the generator's own layout guards: 173 of 173 ok, octilinear, 0 diagonals.
· SPARSE on all 173: 0 sheets draw a dense-table element; all 173 carry the
bold "N UPG's" count.
· real values: 0 sheets show 0, NaN or blank population. Worst cases by UPG
count: Sudan 105 / ~20.7M, Brazil 103 / ~63K, Laos 95 / ~968K.
Shot on the fleet's shared Chromium (no private browser), one page at a time:
173 of 173, 0 failed, all 3000x3000, none blank. Smoke-tested and looked at
first: Sudan shows the bold facts row, no vision columns, "1 of ~170 maps".
ALL 173 CHANGE: 173 source thumbnails, 173 full-size and 173 served previews
differ from development, 0 strays, nothing written to a stray library/ path.
China is deliberately NOT here: its thumbnail stays the dense "map 174 of 174"
it has tonight. Its print becomes SPARSE with "map 1 of 1" via the small-total
guard. The remaining numbering difference is R-CHN-SERIES-TIER, a product call
after the demo.
Fully open, the legend took 297px of a 712px phone map, 86% of its width, with the India-by-state
block and both caveats always showing, and there was no way to shut it. On a phone (under 700px,
Gospel Resources' breakpoint) the title stays and the rest folds behind "Key & notes": folded by
default, remembered for the session, and a remembered choice wins over the width default.
Desktop is unchanged. Two new strings, in all eleven locales.
Rebuilds cities-internet only, with its three pages and the two manifests.
Reported from a phone: on the Regions tab, "2 posters per row" for the country
posters did not work -- a 390px phone showed ONE per row.
THE CAUSE is a deliberate clamp in PosterWall. The per-row setting is 2, but the
grid is Math.min(perRow, fits) with fits = floor((viewport - 36) / 210), and at
390 that is floor(354 / 210) = 1. So the setting said two and the phone silently
showed one.
★ WHY THE CLAMP EXISTED, AND WHY IT IS SAFE TO RELAX NOW. It was added when a
two-up card (~162-170px) CLIPPED its action labels -- 'Prayer List' and 'Poster
Map' both read 'Pra...', and Romanian's 'Pachet de cartonase' was measured at 54
of 81 controls clipped at ro/390. That was then fixed separately: the labels WRAP
(.pfs > .pbtn, "a label too long for its box wraps"). With wrapping in place the
clamp no longer protects anything; it only costs the phone a column.
★ IT IS OPT-IN, NOT A GLOBAL CHANGE. PosterWall is shared by twelve files,
several of them frozen experimental maps. A new minCardPx prop defaults to 0,
which means the existing 210px clamp, so every wall that does not set it lays out
byte-for-byte as before. Only regions-list sets 150, which gives two per row at
360, 390 and 414, still one at 320 (which genuinely cannot hold two), and no
change on desktop (already capped at the per-row setting of 2).
MEASURED on the regions-list leaf page, this branch served locally, against
FINAL on :4611 -- by hit test and by eye:
FINAL @390 en 1 per row, 367px cards
AFTER @390 en 2 per row, 169px cards, 0/123 labels clipped
AFTER @390 ro 2 per row, 0/123 labels clipped <- the old clipping corner
AFTER @390 ar 2 per row, RTL, 0/84 labels clipped
AFTER @1440 en 2 per row, unchanged
0 horizontal overflow and 0 console errors in every cell. The print buttons now
stack three high on a phone card instead of sharing a line.
KNOWN, COSMETIC, NOT CHANGED: at two-up the card's "53 UPG · Show on map" pill
wraps "Show on / map" onto a second line. Readable, not clipped.
On a phone under DX Life's header, the band ran 32px past the fold (y132 to y876 on an 844px
screen). The legend sheet's bottom and its collapsed strip began below the fold, so a reader who
collapsed the legend could not reopen it without scrolling. The band now takes the height that is
visible below its own top, capped at the old 88svh, which is also the fallback. It is measured once,
and again only on a width change, so the URL bar showing and hiding does not resize the map.
The word is a military term, and the Driver asked for "prayer movement(s)" / "mobilization movement"
instead. The five user-facing strings in all eleven locales (55; the translated word too: Kampagne,
campaña, حملة, अभियान, 宣传活动 …) now say movement, in each language's natural church usage: Russian
"движение" with "вдохновить" rather than "мобилизовать", Arabic "حركة" with "تحفيز" rather than "تعبئة",
Chinese "宣教动员" rather than 宣传 (propaganda) or 运动; the Portuguese lines move to Brazilian forms like
the rest of the catalogue. The instance title and the meta note follow, and the CSV exports' column
headers become bridge_language / bridge_language_code (a user sees them in every spreadsheet).
Identifiers stay: the "view":"campaigns" profile-config value (embeds pass it), the i18n key names,
file and function names, and the campaigns-server references.
