usePosterLayout has always computed a real layout: the map narrowed by the legend
column and inset by the margins, the title strip and the footer strip. Nothing in
the exporter ever read it. The map was rastered at full page size -- edge to edge,
across the margins and both bands -- and the title, legend and footer were then
composited on top of that image. The legend lay over the map it describes, and
there were no bands at all.
What kept it hidden is that PosterPreview.vue DOES honour layout.map, so the
on-screen preview has always shown the intended design and only the exported file
was wrong. A preview is not evidence for an export.
The obvious fix breaks a different product. country-posters embeds this renderer's
output as a full-sheet <img> inside its own packet page, beneath the packet's own
title, so chrome that is on by default prints a second header and footer within
their page. UPG-100's packet does not call this renderer at all and was never at
risk -- checked rather than assumed. So the composed sheet is requested with
spec.layout === 'poster', and every existing caller, which sets none, keeps what
it had.
That guarantee is stronger than "equivalent": with no layout the renderer passes
the SAME px OBJECT it always did to the rasteriser and composites no sheet, so the
untouched path is unchanged by identity, not merely by value. The check asserts
exactly that, by executing the decision with four real caller shapes -- including
country-posters' A4 at 150 DPI -- rather than reading the source for a promise.
Its second negative test is the ruling's own failure mode: make defaultPosterSpec
set the layout and country-posters is named as silently opted in.
A sheet with no room left for a map after its margins, bands and legend column
falls back to full-bleed and says so, because silence there is the bug above.
Simple Research's export asks for the layout explicitly.
The page-1 notice for a missing map existed only in English, which
turns check:packet-strings-parity red: the packet catalogue must be
whole in every language, and English-by-choice is not one of its
declared exceptions (only the licensed Mark 5 passage is).
All eleven blocks now carry the sentence, reusing each block's own
page-1 wording for "prayer list" so the notice reads like the line
above it. The English says "prayer list" rather than "zone": zone is an
internal term, and the page itself calls it a prayer list. The Chinese
block is Traditional script, so the sentence is too, with the Taiwan
term for printing.
The loud gate's note described the old English-only state; it now
reports which locales fall back, or that none do.
Page 1 of every packet draws the zone map from mapSvg. When the map
fetch fails, the page interpolated an empty string: a title, a
subtitle, a privacy footnote, and nothing where the map belongs. A
failed fetch and a successful render were byte-indistinguishable in
the printed PDF, and the packet read as undeveloped.
It is not a rare edge. The served asset pool ships boundaries, fonts,
images, people-groups, pplr, previews, tables and vendor, and no
posters/ directory at all, because generate-tree gates it behind
posterSources and bundlePosters, both default false. Over live HTTP
against the served tree: previews/sudan.webp 200,
boundaries/world-adm0-web.geojson 200, posters/sudan.html 404. So on a
default build every packet's page 1 has been blank.
The browser path's catch around the poster fetch is right to keep
printing -- a missing map must not cost the reader the people pages --
but degrading and degrading silently are different things, and only
the renderer knows the map is absent when it draws the page. It now
prints one quiet sentence in the map's place.
The sentence is English-only on purpose. t() falls back to English per
key, so the other ten locales print it in English until a translator
supplies theirs, rather than ten invented translations nobody can
check.
The real fix for the blank map is shipping the poster sources in the
asset pool; that is a tree-config change and goes separately.
check-packet-map-missing-loud is two-sided: loud when the map is
missing AND quiet when it is present with the SVG intact, in en/es/ar,
both variants. Shown capable of failing four ways: the silent cover, a
notice that always prints, a notice that displaces the map, and the raw
key printed instead of a sentence.
The joining page, DEPLOY and the laptop sync default moved to development in the
commit before this one. This finishes the move and closes what a fresh clone's
friend test found.
- landing-preconditions diffs against origin/development when no landing branch
is exported, instead of main.
- CLOUD-DEVELOPMENT-ENVIRONMENT, the plugin-designer skill (SKILL.md, workflow,
glossary) and the shared dev server's notes land on and follow development;
the skill says never to push to main.
- The sync fetches with the laptop's own credentials. git runs with prompts off,
so on a clone with no credential helper it failed every interval with a bare
"fetch-failed / remote: Unauthorized", which read as a broken server. That case
is now its own state, needs-credentials: the log (once, not every tick) and
/api/dev-sync say "dev-sync needs git credentials for <remote>". The joining
page and .env.example say so, and that a fresh clone starts on main and must
switch to development before the sync can fast-forward it.
Measured in scratch repos: the private remote with no helper gives
needs-credentials and one warning over two ticks; a local remote with no
DX_SYNC_BRANCH follows development and fast-forwards; a missing remote stays
fetch-failed.
Page 1 of every UPG-100 prayer packet is the zone map, drawn from
<tree>/assets/posters/<id>.html. The tree shipped no posters/ at all:
generate-tree gates the folder behind posterSources and bundlePosters, both
default false, so the fetch 404'd and the packet, which rightly keeps printing
without its map, printed page 1 blank.
The dx-maps config now sets posterSources: the 28 sources, without the 41 MB of
.webp rasters. Measured: 27 MB raw, 7 MB gzipped. The copies are byte-identical
to the tracked data/posters/*.html, so git stores each blob once and a push adds
no new pack bytes. The code default stays false for other deployments.
check:poster-print-fallback now RUNS by default instead of skipping. Part 1 needs
no browser and runs in every wave: when the config ships sources, the built tree
must carry every data/posters/*.html, byte-identical (a stale copy prints an old
map just as quietly). It FAILs 28 of 28 on the tree before this change and PASSes
after. Part 2 clicks the real print control and is NOT MEASURED (75) outside the
browser slot; with no url it serves this checkout and opens the UPG-100 wall. The
skips that exited 0, which a wave reads as a pass, now exit 75. Registered in
gates:post.
The joining page now teaches laptop (the workshop), development (the table everyone lands on, followed by the
shared dev server) and main (production: /cdn, the websites and every partner snippet load it; never pushed to
directly). Its commands pull and push development. Schema is made on a laptop, never in the shared server's
PocketBase screen, whose automatic migration files are lost at the next restart.
DEPLOY: the cloud server follows development and publishes main at /cdn (PRODUCTION_BRANCH=main); publishing
merges development into main; EMBED_BASE_URL makes snippets absolute; /cdn revalidates within 5 minutes. The
drop-in example pointed at a deleted branch and now names research-gallery-drop-in, with a link to running all
three DX-life ways on a laptop.
Laptop sync (DX_SYNC_REMOTE) follows development by default, so teammates' landings arrive before they are
published.
RT8 goal (b). Two gates already touch the engine and neither asserts this:
check-leaf-engine-per-provider proves MAPLIBRE purity (zero *.mapbox.com
requests under ?provider=maplibre) and that a map still draws, but never forces
Mapbox; check-provider-switch does load ?provider=mapbox — with a FAKE token, so
the engine LOADING was measured and a tile RENDERING never was, on one leaf.
So "Mapbox works" was unmeasured across the seven production tabs. This measures
it, and refuses to pretend when it cannot.
WHAT IT READS, and why each is the stronger property:
· THE ENGINE off the canvas that drew — .mapboxgl-canvas vs .maplibregl-canvas
— never from which globals exist. A leaf asked for Mapbox that quietly draws
with MapLibre looks identical to success in a screenshot and passes every
paint check; a peer script that merely loaded Mapbox proves nothing.
· THAT IT DREW via queryRenderedFeatures() > 0. A canvas at the right size is
not a map: this repo already had a country map render fully blank while "a
real GL canvas exists at 1200x780" passed.
THREE EXIT STATES, BECAUSE TWO WOULD FORCE A LIE. On this sandbox the Mapbox
/v4/ composite raster endpoint and country-boundaries both 403 — proven outside
the browser with no Referer, with 127.0.0.1 and with localhost, so it is tileset
ENTITLEMENT, not the embed (PRODUCTION-MATRIX:235). Failing on that would
manufacture work for every owner; passing on it would be false. It exits 75 NOT
MEASURED and names the endpoint. No token, or a non-pk. token, is also 75 — a
fake token is exactly the false green this gate exists to refuse.
THE NEGATIVE ARM is in the same file: ?provider=maplibre must draw with MapLibre.
If it does not, the engine check cannot tell the engines apart and every pass
above it is unfalsifiable.
★ TARGETS COME FROM THE MANIFEST, AND SELECTING ON isMap ALONE LOST A TAB.
Measured: it found 6 of the 7 curated tabs. research-map-plus-grid (Simple
Research) is a nested-elements-mfe with isMap:false whose CHILD holds the map, so
it would have been skipped in silence — the exact class of miss this gate is
meant to catch. A composed tab now counts if it is isMap ITSELF or composes a
profile that is: 7 of 7.
Registered in package.json (script + description) and in verify-browser-all's
GATES array — deliberately NOT gates:pre, because it needs the browser seat.
Verified by re-reading the parsed package.json, and check:no-orphan-gates names
only the pre-existing check-gospel-whiteboard.mjs, not this.
HARDENING, NOT THE FIX for the grey Regions tab. That tab has been seen loading
grey on first load and coloured after a reload. This closes one ordering that
can reach a flat-grey fill. On built bundles that ordering did not reproduce the
grey tab (0 of 20 loads grey, the fill present with its expression at addLayer),
so the reported bug stays open; the lead is the dev/HMR re-mount path.
THE ORDERING. regionFillExpression builds a ['match'] from props.points; with
no points it returns a FLAT no-data grey. addLayers SNAPSHOTS that value into
the layer's paint when it creates the layer. applySubject does repaint the fill
correctly, but it guards every write on getLayer() — deliberately — so a change
arriving BEFORE the layer exists is silently dropped and never retried. And on
MapLibre, the DEFAULT engine, the country boundaries are added as an EMPTY
source and populated by a later fetch's setData(), which nothing repainted
after. In that ordering the fill keeps the colour it was born with.
THE CHANGE is one call: repaint after the boundaries setData, which is the first
moment the layer has any features on the MapLibre path and the only repaint
guaranteed to run with both inputs present. applySubject is idempotent and
getLayer-guarded, so it is harmless when the colour was already right — it only
removes the ordering's power to be the last word.
★ TWO THINGS I GOT WRONG FIRST, both caught by the gate rather than by review,
and both recorded because the wrong version was plausible:
1. MY MODEL COULD NOT REPRODUCE THE BUG. The first version's negative control
fired: no arrival order greyed even with no repaint, so it could not have
detected what it existed for. The greying order is not "data before the
layer" — by then the snapshot is already coloured. It is points arriving
AFTER both addLayers and its mount repaint, with the watch's repaint not
landing. Corrected, exactly 1 of 3 orders greys without the fix and none
with it.
2. I BLAMED THE EMPTY SOURCE, WHICH CANNOT CAUSE GREY. An empty source draws
NOTHING; fill-color is an expression over feature properties. A grey
landmass therefore means features ARE present and the expression came back
flat. The repaint after setData is still required, for the narrower reason
above. The gate carries that correction so the wrong reason cannot be
inherited from a comment.
THE GATE'S OWN INSTRUMENT WAS WRONG TWICE TOO. A 400-char window between
setData and the repaint failed on the repaint's own comment. Widening it to
1600 then PASSED when I deleted the real repaint and left an unrelated
applySubject() 1200 chars downstream — measured, not feared. A distance is the
wrong instrument, so the .then() block is now extracted by brace matching and
the repaint required INSIDE it. The first structural attempt anchored on the
nearest '=>' and landed inside the callback body, because `for (const f of ...)`
has one; it anchors on the enclosing '=> {' now. Four arms mutation-tested,
including that decoy, and every mutated file restored byte-identical.
251606460 dropped each component's window hooks on unmount, but deleted them
unconditionally, and that is wrong as soon as two of the same component share a
page -- which research-map-plus-grid and the Big Picture composite both arrange.
B mounts and overwrites A's hooks; A unmounts and deletes them; B is still on
screen with its verify hooks gone. Not a leak, and not visible to a reader: the
cost lands on rega, as a hook reported missing on a map that is perfectly
healthy, which is a more expensive thing to chase than this is to write.
people-groups-grid already compared identity before releasing. research-map (4
hooks) and the dashboard map panel (3) did not, so the commit was uneven with
itself; gospel's d3597f3d1 settled on the same identity-checked pattern, and one
pattern across the fleet is what lets the check enforce it later.
Each hook is now held in a local as it is installed -- window.__x = _hookX = (…)
-- declared outside the block that assigns it, because a const in there is
invisible to onBeforeUnmount. The release compares before deleting, one key per
line, so the check can read both halves.
The check reports how many releases are identity-checked and enforces it under
STRICT_IDENTITY=1, which is off only because other owners have not adopted the
pattern yet. Flipping it later is a smaller change than re-deriving this.
Two things it taught me while I wrote it. Enforcement first flagged the grid,
which WAS identity-checked -- the comparison simply sat on the line above the
delete, and looking only at the delete's own line dictated formatting instead of
recognising correct code; the window now covers the lines leading up to it. And
the pattern is tested for BEHAVIOUR, not presence: two hooks installed in turn,
the first unmount must leave the second working, the second must leave nothing.
rega's heap snapshots (leak-722ac7789): Simple Research and All People Groups
mounted twice went 54.2 MB to 65.1 MB, with live Vue apps 6 to 8. Every unmounted
application was still there, one copy per mount, and the retainers were all the
same shape -- a window key set during setup and never cleared. The closure keeps
its component, the component keeps its shadow root, and a whole app survives its
own unmount. An element property dies with the element; a window key does not.
The named one was window.__doxaLogoOwner -> Map -> div.rm-map-canvas -> ShadowRoot
-> app, released only when the map's 'remove' event fires. That listener cannot be
the guarantee the global is cleared, because it only runs if remove() is reached;
it is a consequence of the guarantee, not the guarantee itself. useMapInstance now
drops the claim inside destroy(), before removing, so it goes even if remove()
throws part-way.
As for why remove() was never reached: research-map's unmount hook ran ten
teardown steps and called destroy() last, and two of those steps were unguarded
calls into other composables. A single throw anywhere above stranded the map, and
with it the app. I could not reproduce which step threw without a browser, so the
fix does not depend on knowing: each step is isolated and destroy() runs from a
finally, where nothing above it can skip it. Ordering teardown so the most
important step is last, behind nine chances to fail, was the real defect.
The globals themselves are released by the components that set them -- four verify
hooks in research-map, three in the dashboard map panel, the vocabulary hook in
the grid, which had no unmount hook at all. Released as SETS: __rdashPinAt was the
one the snapshot named, but __rdashMap holds the map and retains strictly more, so
clearing only the reported one would have looked fixed and leaked nearly as much.
The deletes are written one per line instead of looped over an array of names, so
that the check can read them. A release a checker cannot see is worth no more than
no release, the day someone removes three of the four.
The check flags only values that actually retain. A warn-once boolean latch and a
page-wide cache keyed off itself are deliberate and must not be reported, or it
becomes noise and gets switched off. It is NOT in gates:pre: 19 sites remain in
other owners' plugins, and this is a fleet pattern rather than one plugin's bug.
useLegendData returns { items, columns, title, activeFilter, setFilter,
totalCount, totalPopulation, progress, fmtPop, fmtCount }. There is no `rows`.
research-map read legend.rows in three places, and because JavaScript answers
undefined rather than complaining, each one failed in a different costume:
- provide('legendRows', legend.rows) provided undefined, and nothing in the repo
injects that key -- the comment above it described a contract no component
implements
- openPoster's fallback, legend?.rows?.value || [], could only ever be [], so on
any tab where the flat legend is empty the poster had no legend rows
- the packet's page-1 slot was rows: legend?.rows?.value || [] with NO second
source, so that poster's legend was empty unconditionally
and useMapPoster skips the legend slot entirely when the row list is empty. So the
missing legend on the exported poster had two independent causes: the renderer
painting it over the map, fixed separately, and this -- an empty array arriving
through a fallback that could never be anything else.
Both poster paths now share one builder, so they cannot drift apart again, and it
flattens children because a prayer legend is a parent plus two child tiers and
printing only the parents describes bands the map does not draw.
Two further calls went the same way: legend.refresh?.() and
legend.build?.(normalizedPeopleGroups), against methods the composable has never
defined. The optional call swallowed both, so two lines that read like steps did
nothing. `items` is a computed and re-derives on its own, so they are gone rather
than repointed.
exp-shepherd found the same misspelling in countries-map, where it threw instead
(NE-17). The check therefore guards the class rather than these lines: it reads
the returned key set from the composable and reports any consumer reading outside
it. It is NOT in gates:pre yet, because it still reports countries-map, which
belongs to another owner.
Writing it turned up two traps worth keeping. Stripping block comments with one
global regex DELETED REAL CODE -- a slash-star inside an ordinary string opens a
comment nobody wrote and the replace runs to the next real terminator -- and the
check confidently reported "no consumers at all" while both sat in the files. And
matching property reads by name flagged every t('legend.colLabel.religion'): an
i18n key spelled like a property access is not a read.
The projection toggle and the zoom toolbar share the top-right corner. The toolbar
was pinned at a literal top:34px, a number that was correct when it was chosen:
the toggle then measured 74x23 and ended at y=31, which this panel's own comment
records as a live measurement. A later accessibility fix gave the toggle
min-height:24px for WCAG 2.5.8. Nothing in this shadow root sets box-sizing
globally -- it appears exactly once, on the legend -- so 24 was a CONTENT height
and the rendered box became 24 plus 8 padding plus 2 border = 34px. Sitting at
top:8 it now ended at y=42 and ran 8px into the toolbar, which has z-index 10
against the toggle's 3 and so drew straight over it.
Nobody did anything careless. A correct fix to one control broke another because
the agreement between them was a magic number living in the other rule, where the
person changing the first had no reason to look.
So the toggle gets box-sizing:border-box, which makes 24 mean twenty-four and
keeps it a legitimate 24px touch target, and the toolbar's offset is now
calc(--rd-proj-top + --rd-proj-h + --rd-ctl-gap). The relationship is stated once,
on the element that owns it, and both the desktop rule and its mobile restatement
read it. Changing the toggle's size now moves the toolbar by construction.
The check computes the toggle's rendered height from its own declarations the way
a browser does, honouring box-sizing, rather than asserting either number --
restating 34 here would have rebuilt the same trap one file further away. Run
against the code as it stood before this commit it reports the overlap and its
exact size. It also requires the toolbar to DERIVE its offset, because a literal
that is correct today is the precise shape of this bug.
Every plugin ships as a self-contained IIFE, so library/utils/embedScript.js is
compiled separately into each one: eleven bundles on main each carry their own
copy. Its cache was a module-scoped const, which made "load exactly once" true
per BUNDLE rather than per page — the opposite of what the file's own header
claimed. Two shells nesting the same child (the Research Gallery and the Plugin
Studio both mounting doxa-research-map) each injected it.
Nothing failed, which is why it survived. The second request came from the HTTP
cache, so no failed request and no extra network row; the bundle then executed in
full a second time — a second Vue, a second vue-i18n, a second pinia, ~375 KiB
gzip of work — and its guarded customElements.define quietly declined at the very
end. Where the two URLs are different versions of one plugin, whichever executed
first owns the tag and the other is discarded in silence.
The cache now lives on globalThis, the only scope that matches the claim, under a
versioned key so a page mixing old and new bundles falls back to a cache each
rather than misreading a shape it does not expect. Entries are keyed by the
resolved href, because the callers do not pass the same string for one file.
A <script> already in the document is adopted, which is what covers bundles built
before this and host pages that write their own tag; that resolves immediately,
and it is safe only because every caller here follows with a wait on the element
itself — the note in the file says so, since a new caller must keep that pairing.
claimTag is a diagnostic, not a guard: by the time a second bundle arrives the
define is long since won, so the thing that was missing was anyone saying so.
The check imports the module twice under different URLs — two module instances
sharing one globalThis, the same shape as two IIFEs on one page. It asserts the
second caller receives the FIRST one's promise, not merely that one script tag
exists: mutation-testing showed the tag count alone is satisfied by the adoption
path, so it would have passed with the original bug restored.
check-gospel-set-charts read library/components/charts/BoundedSet.vue and
CenteredSetTarget.vue to prove neither grew a `seed` prop. Nothing imports
either: the sets are drawn by gospel-internet's GiBoundedSetMap.vue and
GiCenteredSetMap.vue. So the arm guarded dead code — a seed could have appeared
in the shipping components and this gate would have stayed green.
Retargeted at the two whiteboard maps. Their parents take no props at all (they
read useBoardState), so a seed could only ever arrive in these two files.
Why it matters: position is hashed from each group's own id, so two printings of
one packet are identical. A seed silently rescrambles every dot while the data is
unchanged — unrecoverable on a printed artefact.
Poison-tested rather than assumed: adding `seed` to GiBoundedSetMap fails the
gate by name ("seed,groups") and exit 1; removing it returns PASS. The vacuity
control reads `groups` from the same live file.
Found by regions while removing the dead library components — an import census
cannot see a filename that appears as a STRING in a gate, which is why deleting
them would have gone red on main with no import to explain it.
The composite's first "Show on map" did nothing and only a second click
selected the zone: the list pane dispatched an event at a map pane whose
listener attaches in onMounted, and the pane mounts lazily. That is
fixed on main already -- this is the regression gate it never had.
The fix is three mechanisms, so the gate asserts them separately rather
than asking one "does it work" question that would go green on two of
three. Delivery: the request is written as an attribute before the event
is dispatched, because an element dispatch has no replay and an
attribute is state that survives element upgrade. Arrival: the pane
reads that attribute on mount and observes it afterwards, covering
requests that predate the pane and requests that follow it. Effect: an
arrived request that cannot apply -- because the legend node is not
there yet, or because onLegendSelect refused while the tapestry layer
was down -- is retained and drained at the readiness signal, with the
drain re-checking which request it is draining so a newer selection
cannot be overwritten by an older one.
Mutation-tested per layer, and one mutant escaped first time: there are
TWO retain sites, node-not-found and applied-but-no-selection, and a
single pattern match stayed green while one of them was deleted. They
fail at different layers -- arrival before data versus arrival before
readiness -- so the gate now counts them.
Source-level by design: the race is a lifecycle ordering between two
custom elements, which a DOM-less runner cannot stage. The rendered
check is the browser seat's; what this pins is that none of the three
mechanisms quietly disappears.
The funnel page vanished from all 28 packets during the group-set work
and nothing failed: funnelPage omits when its data is null, and the
builder supplying that data returns null on any internal error. The two
silences compose into a page that simply is not there.
It was caught by a probe looking for the tip's "1 of 28" text, which is
luck rather than method. Asserting presence per zone makes the two cases
distinguishable: "every packet lost one page" shows as 28 failures in
one column, while "this packet has no data for it" would show as one.
28 of 28 now report map, funnel, groups and sets with no failures.
vue-i18n v9 pluralizes by an English-shaped INDEX and applies it to every
locale. Measured on a real instance, authoring 'a | b | c':
ru n=0 -> the ONE form, n=2 -> the MANY form CLDR: 0=many, 2=few
ar n=3, 11, 100 -> ALL the dual form CLDR: few, many, other
That is confidently wrong grammar that looks translated, which is worse than
the single fixed form the regions summary shipped until now. upg100 proposed a
plural key and was correctly refused on this exact ground
(upg-100-list.vue:3006) — "real plural support needs a pluralRules map at
createI18n". The refusal's premise was the missing map, so this adds it.
THE PRECONDITION SWEEP (dx-shepherd), before installing anything: every
catalogue value containing " | " across all 11 locales, and every call site
passing a plural choice.
pipe keys: wall.prayedCount, wall.havePrayed — and ONLY in en. Every other
locale ships a pipe-free label form ("Помолились: {n}").
call sites: exactly two, both in wall-of-people-groups
(CommentsDialog.vue:36, wallCanvas.js:198).
BEFORE/AFTER, 2 keys x 11 locales x n = 0,1,2,3,11,100:
132 renders compared, 0 CHANGED.
Zero changed because the map is SCOPED TO EXCLUDE en, which is the one locale
holding pipe strings today. en is also the case dx-shepherd's assertion (3) is
about: vue-i18n's 3-form default is zero|one|many while CLDR for en is
one|other, so an en string written "none | one | {n}" would change meaning at
n=0. Leaving en out means it cannot.
★ THE BUG I SHIPPED INTO MY OWN FIRST DRAFT, caught by reading the rendered
Russian rather than by any assertion: the index was taken against the fixed
zero|one|two|few|many|other list, which is only correct for a locale that HAS
all six. ru has {one, few, many, other} — no zero, no two — so 'few' sat at
global index 3 while the authored string holds it at 1, and n=2/n=3 rendered
"2 стран" instead of "2 страны". ARABIC HID IT COMPLETELY, being the one locale
that does have all six, so its two indexes coincide. The index is now computed
against each locale's OWN category subset, and ru/ro are authored in that order.
ar 0 لا دول · 1 دولة واحدة · 2 دولتان · 3 دول · 11 دولة · 100 دولة
ru 0 стран · 1 страна · 2 страны · 3 страны · 11 стран · 100 стран
(regionCount likewise; all six categories distinct in ar, all three in ru)
check:plural-forms carries studio's three assertions, each mutation-tested to
fail: FORM COUNT (a 2-form ru string fails against its 4 categories), the
tStatic PATH (reading a pipe key through tStatic fails — tStatic does no
selection at all, so the page would show the literal "a | b | c"), and ZERO (a
5-form ar string fails because ar has an explicit zero category). Every mutated
file restored byte-identical afterwards.
The regions shim gains tc(key, n). t() resolves through tm()+rt(), and rt()
takes a message only — there is nowhere to pass the choice — so a pipe string
would come back whole. tc goes through vue-i18n's own t(key, named, choice).
Registered in all three places and VERIFIED by re-reading the parsed
package.json, not by trusting the replace: my last gate registration silently
no-opped on two of three anchors and studio caught it at the landing.
check-embedded-rtl opens with "TWO DEFECTS", in the present tense, describing
library/i18n/index.js reflecting RTL at construction time and writing
document.documentElement.dir unconditionally. Both were fixed. The header was
not.
It cost a real wrong answer today: I read it as a description of current code
and reported a live library defect on that basis, when main already guards the
documentElement write behind window.MAP_OWNS_PAGE === true, and the plugin's own
direction has moved to ProfileLoader, which computes dirAttr from effectiveLocale
and binds it on .profile-loader. effectiveLocale falls back through lang.value,
which is the profile-config channel -- the very path the header says never
arrives.
So the section is now marked as history, dated, and written in the past tense,
with a pointer to the two places to look before believing either defect is live
again. What the check asserts is unchanged and stated plainly at the end: the
plugin's own root carries direction, the partner's page must not, which is why
it reads .profile-loader inside the shadow root and records partnerHtmlDir
separately.
The trap is worth naming in the file rather than only in a commit message,
because the next reader is likely to be someone interpreting a FAILURE of this
gate, which is the worst moment to be handed a stale account of the code. A
gate's header is evidence of what was true when it was written.
Comment-only: 33 insertions, 9 deletions, no executable line touched.
The gate delegated everything to the browser check, which is exit 75 --
NOT MEASURED -- on every seat but one. So on most machines it proved
nothing about coverage, and earlier today exactly one zone of 28 was
printable with no gate saying so.
The headless half needs no DOM: coverage is a file listing against
clusters.json, the map is markup in the first sheet, and a group count
is a substring count. Per zone it asserts a packet exists, page 1
actually carries the lifted map (an <img or <svg -- the exact thing that
was missing when all 28 printed a blank page 1), and the group count is
above zero, then prints the full 28-row table so a green run still shows
what it measured. The browser half keeps the rendered layer.
Mutation-tested both ways, and the first map mutant was WRONG rather
than the check: stripping <img> tags left laos green because the lifted
poster is one inline <svg> -- the check knew the file better than the
mutant did. A precise mutant (replacing the svg inside the first sheet)
fails naming the zone, and a deleted packet fails coverage by name.
rega RQ20: the driven page asks for show-search:false and show-filters:false and
renders the search box and the filters bar anyway, with 0 console errors. There
were no errors because nothing failed. The key never arrived:
· the preset writes KEBAB into profile-config — "show-search": "false"
· ProfileLoader PROVIDES that object; it does not bind its keys as props
· the profile reads props.showSearch (CAMEL), which keeps its default of true
Three correct-looking layers and no join between them. A preset key that does
nothing looks exactly like a preset key that works, which is why the fix ships
with a gate rather than a comment.
The grid now reads these flags off the config as well as the prop, in the same
prop -> cfg ladder researchUrl beside them already used, and accepts BOTH
spellings: someone writing profile-config by hand reaches for the kebab spelling
because that is what the docs show on the tag, while the prop is camel.
Accepting one silently is what made this inert. An explicit prop still wins.
Proved on five cases including the exact preset, an explicit prop overriding the
config, and config:true keeping the control on.
check:instance-config-keys asserts every preset key reaches the profile that
renders it. Writing it was the interesting part, and it was WRONG TWICE:
1. First version matched only `cfg.` and reported NINE FALSE POSITIVES across
four plugins — big-picture reads config.value.accent, doxa-simple-map reads
profileConfig?.value?.tabs. The config object's variable name is each
profile's own business; matching on it measured my naming habit, not the
contract.
2. Widening it to "any accessor" then matched `props.showSearch` — the exact
line that does NOT work — and the gate went GREEN on the defect it exists
for. props is the one object that cannot carry a profile-config key, so it
is now masked out before the match.
Mutation-tested after that: reverting the fix to props-only makes it fail again,
and the grid file is restored byte-identical. A gate I have not watched fail is
not evidence, and this one passed for the wrong reason once already.
The four bundles that embed the grid are rebuilt, so the fix is in the shipped
.js and not only in the source rega cannot run.
Scoping freshness to a library change's consumers makes the scope a long bundle list, and the
record file named after it exceeded the filesystem's name limit (ENAMETOOLONG) after a PASS.
A host that builds its own tree (maps-dev's /cdn build inherits the container env) can bake
absolute embed snippet URLs without a committed config change, the same pattern as
DOXA_SYNC_PATHS. The value is the base without the tree name; a trailing slash is trimmed.
check-embed-targets-exist reads the same effective base. Unset, the tree is byte-identical.
RQ-RGPRINT, standalone /regions-dashboard/region-dashboards/ on a035408e2,
Chromium print media: ONE page, Letter. The map DID draw — basemap, region
fills and dots all rasterised. But the document under print media was 900px
tall, one viewport, while the content continued to y=1753. The sheet showed the
stats and the map, then blank to the bottom, and the region list ending at
"Oceania" was simply absent.
The cause is the leaf, not the plugin: `#slot, <tag> { position:fixed; inset:0 }`.
A fixed element paints once, on the first page. Every leaf taller than a screen
has been printing its top screenful and dropping the rest, and no shadow-root
rule could reach it — a shadow root cannot restyle its host's document rule,
which is why the dashboard's own print CSS landed and changed nothing here.
min-height rather than a bare release: a full-bleed map leaf takes its SIZE from
that fixed rule, so height:auto alone can leave a zero-height box and print an
empty page — a worse failure than the one being fixed. The obvious knob is the
wrong one: isMap is true for region-dashboards, which is a scrolling dashboard,
not a full-bleed map. The floor keeps a definite box for the map case while
letting a taller document flow onto page two.
Still to be looked at, and asked for: one printed full-bleed map leaf, to
confirm the floor holds a canvas that was sized by the fixed rule. The
dashboard case is measured; that one is reasoned.
No generated leaf page has ever carried an @media print rule — measured across
the tree: zero, out of 63. Two consequences, both on every plugin:
The page background is #0a0e15. Browsers drop background colours by default, so
this is invisible until a reader ticks "Background graphics" to get the MAP on
paper — and that reader, the one who most wants the printout, gets the sheet
flooded black around it.
#status is the loading overlay: position:fixed, inset:0, above everything. It
is emptied once the element mounts, but it is still a full-sheet layer, and a
page printed before or during load prints "loading…" over content that did in
fact load. It is hidden only while it is NOT an error: an error still prints,
because a blank sheet with the explanation suppressed is worse than a sheet
that says what went wrong.
Deliberately NOT in this commit: releasing the leaf's position:fixed. The bare
leaf pins the element with `#slot, <tag> { position:fixed; inset:0 }`, which is
why a standalone dashboard still prints one screenful even after its own print
rules landed — a shadow root cannot restyle its host's document rule. Releasing
it would make a full-bleed map leaf resolve its height against auto and could
print an empty box, so the discriminator is not `isMap` (region-dashboards is
isMap:true and is a scrolling dashboard, not a full-bleed map) and I will not
guess one from source. It needs one printed page looked at first.
The platform dashboard is moving off one shared index onto each team's own
/cdn/dx-maps/manifest.json, so this manifest now has to answer a question it
never carried: may another team list this plugin. Per bundle and per profile:
"team" listed only in the owning team's library
"public" also listed in every other team's library, read-only from our CDN
absent team
Emitted ONLY when public, so every manifest in the tree keeps the bytes it has
and nothing becomes visible by upgrading the generator — verified by rebuilding
the tree and comparing: byte-identical.
Three things this encodes rather than states.
`stage` is NOT this field. It sits directly beside it, reads like a fit, and is
maturity rather than audience — using it would hide every experimental plugin
from its own team and publish every production one to everybody, wrong in both
directions at once. The header says so where the next reader will be standing.
An unrecognised value is REFUSED, not defaulted. Coercing "Public" to team is
the safe direction and that is what makes it dangerous: the author has written
their opt-in, the manifest says private, and the plugin never appears anywhere,
with no error to search for. The generator exits, naming the profile and the
value, at the build that would have published it. Both halves were mutation
tested: "public" reaches the manifest at bundle and profile level; "Public"
exits 1; absent leaves the file byte-identical.
A bundle is public if ANY of its profiles is, because a bundle is one IIFE.
Profiles share a single .js, so publishing one publishes the file the others
compile into; there is no shape of this field that makes half a script
fetchable. The per-profile key is still emitted, so a reader can list only the
profiles that opted in while loading the one bundle.
The built manifest and the dev server's both go through profile-meta.mjs, so
the dev Studio and the built Studio cannot disagree about this the way they
once did about "widget".
A change under library/ used to scope freshness to EVERY bundle (~10 min a round). It now checks
each bundle whose source graph contains a changed library file, or that reads a changed i18n
area, found with the same graph walk the i18n tree-shake uses. Only a change to the build itself
(vite config, lockfile, build config, generate-tree, or package.json dependencies) still means all.
This is the gate for the defect that cost the most: the packet dropdown
was built into a component the profile people open does not mount, so it
was landed, served, and invisible. Nothing caught it because every check
looked inside ONE file. The legend EMITS a string and the plugin PARSES
it, and those live in different files -- the only assertion that could
have failed is one that reads both and compares.
So it reads what the menu emits, then asserts the consumer can handle
every one of those kinds; that the kind is split on ':' rather than
matched against the two current literals, because matching literals is how
the next variant silently becomes a no-op; and that the parsed value
actually travels -- call site, signature, and the forward into printPacket
-- since asserting the split alone would pass while the value was dropped
on the floor. It also checks the five strings the menu renders exist,
because a missing key prints the raw key and the explainer is the only
place a reader meets what a UPG 100 list is.
Mutation-testing found a hole in my own assertion. The check for the call
site matched `printPrayerPacket(zoneId,\s*variant`, which the DECLARATION
-- async function printPrayerPacket(zoneId, variant = 'full') -- also
matches. A mutant that deleted the argument at the call site left the
declaration behind and the assertion stayed green: true for the wrong
reason, the same family as a tautology but reached through ambiguity.
Anchored on `await`, which only a call has.
Three mutants now fail with their own messages: the legend emitting a kind
the plugin cannot parse, the call site dropping the variant, and
printPrayerPacket holding it without forwarding it.
The Prayer-list dropdown went into PosterWall's per-card print row. The
profile people open -- upg-100-list -- does not render PosterWall at all;
its print path is the legend's Export menu, which still offered two items
and printed immediately. So the feature was built, landed and served, and
invisible on the only screen it was asked for.
Two surfaces legitimately offer printing and both carry a button labelled
Prayer list, so the label was not enough to tell them apart. The grep that
would have caught it -- does this profile mount that component -- takes
five seconds and I never ran it.
The legend's packet item is now a disclosure: it is named UPG 100, it
explains what a UPG 100 list is, and it reveals Full detail and
Lightweight. The explainer matters because this menu item is the only
place a reader meets the idea, so it wraps rather than truncates.
The submenu opens BELOW its trigger by construction, not by positioning:
the menu is a flex column, so a block after the button flows underneath
it. A panel that grows its parent cannot cover its parent -- which is
exactly what the card-deck row could do, hanging out of its card at
top:100% with nowhere to go on a short viewport.
emitExport widens its existing string to packet:full / packet:lightweight
rather than adding a second event; poster and a bare packet still work, so
an older consumer keeps working and one event means nobody can handle only
half the menu. printPrayerPacket takes the variant and forwards it to
printPacket, which already accepts it.
UPG 100 is allowed to be identical in all eleven locales, recorded in
check:i18n-never-translated as a brand name rather than as debt: it is not
waiting on a ruling, it IS the ruling, and the explainer beside it carries
the meaning per locale. Inventing eleven names for one product would be
the failure that gate exists to prevent.
Found by the bug-CLASS sweep, which is the point of doing one: the busy
indicator was added to the selection HUD after a report that pressing its
buttons showed no sign of work, and the legend's Export menu -- Poster and
Packet -- had none at all. Same defect, different surface, and I fixed the
reported instance without looking for its siblings.
Both do the same slow work: two dynamic imports, a map-SVG fetch, a funnel
fetch, then a multi-sheet render. onLegendExport now guards re-entry (a
second click would run two renders over one print frame), sets busyAction
so the control says what it is doing, and clears in finally on every exit
path including the early return inside the try.
The gate's busy assertion had two holes that let this through, and both
are fixed. It counted setters by matching the literal strings 'packet' and
'poster', so a ternary assignment was invisible -- a regex that enumerates
the shapes it knows about will always miss the next one, so it now matches
the assignment and excludes the clear. And it only asserted a whole-file
count, which "some handler somewhere sets it" satisfies; it now asserts
PER FUNCTION for all three print paths, so a surface cannot be forgotten
while the file as a whole looks fine.
Mutation-tested: removing the busy handling from onLegendExport now fails
naming that function, and dropping a finally fails naming its own.
Also drops a stale "page 3" from a shipped CSS comment -- page order is
variant-dependent since lightweight started omitting two sheets, so a
fixed page number in the output is wrong even where no reader sees it.
The layout modules moved to library when they were promoted, and three of my
files still named the old paths: the two new whiteboard components, which were
written before the move landed, and the geometry check, which was written after
it and still copied the old import from its neighbours.
GiBoundedSet also carried an unresolved conflict — markers and all — committed by
a cherry-pick loop of mine that resolved generated output automatically and swept
the source conflict along with it. The file had both imports of the same symbol,
one of them pointing at a deleted path. It parsed, so the SFC check passed; only
the bundler would have caught it, and only at the point where it could not
resolve the file.
The lesson is about the loop, not the file: resolving one class of conflict
automatically is fine, but `git add -A` afterwards does not distinguish the
conflicts you meant to resolve from the ones you did not. A loop that stages
everything needs to refuse when a marker is still present.
Three properties, each with the arm that catches its own defect: the bounded
set's gap survives projection, the drawing stays inside the Mercator clamp, and
a radius expressed in map units doubles with every zoom level.
The first arm taught me something I had assumed the opposite of. It narrowed the
gap to a tenth of a percent expecting the margins to go negative. They stayed
positive: the projection is conformal, so it preserves the ratio exactly, and a
narrow gap survives just as an eight percent one does. There is no distortion for
it to be eaten by.
So "the gap survives projection" is close to a tautology, and a check resting on
it alone would look like a guard while testing almost nothing. What can actually
fail is the ordering of the constants, and that is what the arm now poisons. The
narrowing case is kept as a passing assertion rather than deleted, because the
fact that it is safe is worth stating: the boundary cannot be eroded by the
projection, only by someone editing the numbers.
The clamp arm holds for every chart at once. The ceiling belongs to
extentFraction alone, not to a chart's extent — the scale is extentFraction over
extent and the outermost point sits at the extent, so the product is always the
fraction. Asserted across four extents, identical to three decimals.
DRV1650-SR-LEGEND-FILLS-SEARCH-GAP. On Simple Research's Regions and Languages tabs the
search bar is gone but the legend does not rise into the space. The other tabs are fine.
The two-tab split was a predicate, not a coincidence. With no geocoder the legend rises
to 14px UNLESS showsFlyTools() is true, and that returns true for exactly 'doxa-regions',
'language-family' and 'language-families'. It stops at 56px to avoid a MEASURED collision
on country-posters, where LegendTools renders at top:14px — the legend's own slot.
★ BUT showsFlyTools() DESCRIBES THE LEGEND TYPE, NOT WHETHER THE TOOLBAR EXISTS. Fly and
Clusters are leaf-only: the composite — which is what a reader calls "Simple Research" —
passes legendTools:false, so the toolbar is never drawn there and the 56px reserved a
slot for nothing. rega measured it at 1440x900 on main e1d0bc20: the band from the map's
top edge (y 44) to the legend card (y 100) is 56px of EMPTY map on both tabs, with no
LegendTools anywhere in the strip.
So the offset now asks whether the toolbar is RENDERED, not whether the type allows one.
Keying it on the tab name would have closed the Driver's gap and reintroduced the
country-posters collision the moment the tools were shown — the guard is kept, it is
simply asked the right question.
showLegendTools moved ABOVE legendTopVar, which reads it. A computed body is lazy so a
later const would have resolved at runtime, but this file has a TDZ history and
check:setup-order exists because of it; position is cheaper to keep honest than to reason
about.
check-legend-top-offset asserts BOTH inputs are consulted — drop either and it fails —
and that the declaration still precedes its reader. Negative-tested.
This is reading (b) of the two I put to dx-shepherd, chosen because rega measured it
rather than because it was likelier. Reading (a) would have been a cosmetic change to a
toolbar that turned out not to be there.
These land with the change that would otherwise hollow them out. Both gates
reached the Mapbox engine by filling a token into the published snippet, which
worked only while a token selected the engine. It no longer does, and the
snippet now pins provider explicitly, so both Mapbox arms would have run
MapLibre and still passed.
Both now name the engine. The shelf gate REPLACES the provider key rather than
prepending a second one: a duplicate key parses to whichever came last, which is
a coin-flip that happens to work today.
The more useful half is the vacuity check, because the old assertions were all
of the form "no request used the wrong token" — trivially satisfied by making no
requests at all. Each Mapbox arm now fails if it contacted Mapbox zero times.
In the shelf gate the two flags are twins set from one expression, so an arm
cannot be exempt from both: under maplibre zero requests are required, under
mapbox at least one.
Without that pair, the day a Mapbox arm silently runs MapLibre both arms pass
and the gate measures one engine twice.
I cannot run either: both are Playwright and the browser belongs to rega. Syntax
checked, the browser-gate guard still passes across 405 files, and gates:pre is
green — but the behaviour these assert is unverified by me and needs rega.
The snippet is the only thing a partner ever reads, and before this none of the
36 mentioned provider at all. So when a token stopped selecting Mapbox, the
hosts affected were exactly the ones who had pasted a real token into this
snippet — and they had no way to see the lever that would give it back.
Emitting "provider":"maplibre" restates the new default, which looks redundant
until you ask what the snippet is for. Stating the default is what makes the
alternative visible. A one-line HTML comment above the element names the opt-in.
Generated, so the change is in the generator; the 36 files follow from a tree
run. Verified 36 of 36 carry both the key and the note.
⚠ THIS CHANGES WHAT TWO BROWSER GATES MEASURE, and they are not mine to edit.
check-map-embed-cells and check-experimental-shelf both fill YOUR_MAPBOX_TOKEN
into this snippet to exercise the Mapbox path. With provider pinned to maplibre
they will get MapLibre and make no api.mapbox.com requests at all — so an
assertion like "every api.mapbox.com request carries the host's token" stops
failing because it stops having anything to check. Each needs to swap the
provider to mapbox in the snippet it builds, the way the shelf gate already does
for its leaf URL with ?provider=. Flagged rather than silently left to surface
as a green run that measured nothing.
The console showed 24 Vue warnings, 8 each for "profileModules", "appI18n"
and "Symbol(pinia)" — "already provides property with key … inherited from its parent
element. It will be overwritten with the new value." They come from a composite mounting
child custom elements: Vue's CE layer lets a child app inherit its parent ELEMENT's
provides, and app.provide() warns on any key already reachable.
ALL THREE MUST BE THE CHILD'S OWN, so neither silencing the warning nor honouring it by
not providing would have been right. profileModules is the plugin's own .vue glob — a
child rendering its parent's components is a different and worse bug. pinia is
per-instance so two embeds on one page never bleed store state. And the i18n instance is
the one ProfileLoader drives from THIS element's profile-config, which is the whole of
the permanently-English fix from earlier today. Inheriting any of the three would be the
regression, not the warning.
So the shadow is made DELIBERATE at the line that does it. provideOwn() writes to the
app's own provides when the key is already reachable and uses the public app.provide()
when it is not, so the ordinary path is untouched. pinia needs the other shape: its
symbol is module-private, so it can only be provided by app.use(), and the key cannot be
named — withoutInheritedProvides() hides the inherited chain for the duration of the
install and restores it in a FINALLY, so a throwing install cannot leave an element
unable to see its parent.
The helpers are split into library/elements/provide-own.js with NO framework import,
because defineMapElement.js imports ProfileLoader.vue and is therefore unloadable by the
gate that proves it right. Third time today that split has been necessary; the gate now
exercises the shipped helpers rather than a copy.
check-provide-shadowing asserts BOTH halves — the child ends up with its own value, AND
the parent's other provides still resolve afterwards — against a Vue-shaped fake app that
warns exactly as runtime-core does. Its control is the naive call, which must still warn.
Negative-tested three ways, including moving the restore out of the finally.
check-element-bootstrap now accepts either spelling and was re-checked for the thing it
actually guards: removing the provide entirely still turns it red.
Follow-up to 50ebdf89, which kept an internal tracking id on the grounds
that a reader needs to know where the answer comes from. The ruling is
that in shipped code the id should go too, and it is right: a row number
means nothing to someone reading packet-render.js, and it points at a
place they cannot open.
What the comment has to carry is that the value MAY CHANGE, so a later
reader does not treat it as settled and hardcode it somewhere. "Provisional,
pending a product decision" says that without pointing anywhere.
Three sites, all mine. CenteredSetTarget.vue carries the same reference
and is not mine; it belongs to the carded fleet sweep.
Per the 17:25Z rule: no quotes, no citations and no transcript references
in strings, commits or code. Studio had to strip these from two of my
commit messages during L64, which is a sign I should be doing it at the
source rather than leaving it to whoever lands the work.
Nine sites across five files, all of them lines I added. The engineering
content is unchanged -- what goes is the attribution, not the reasoning.
"A disabled button is visually indistinguishable from an unresponsive one"
is the durable fact; who observed it is provenance a later reader cannot
verify and that ties shipped code to a private transcript.
Where a decision is genuinely still open I keep the tracking reference
("still open, tracked as row 89") but not the speaker, because a reader
hitting that comment needs to know the value may change and where the
answer will come from.
Scope is deliberately my own unlanded additions. packet-render.js,
PosterWall.vue and upg-100-list.vue carry many more such comments from
before the rule; those are not mine and a fleet-wide sweep is a separate
decision. Flagged rather than silently rewritten.
All seven gates green after the edit, including the two whose own header
text changed.
The Driver wants MapLibre as the default everywhere, on cost and on how it
looks, with Mapbox supported as an explicit choice.
One line decided it. resolveMapProvider read
explicit || (token present ? 'mapbox' : 'maplibre')
so merely HOLDING a Mapbox token selected Mapbox. That conflated two different
things: having a token is a capability, wanting Mapbox is a decision, and only
the decision belongs in this function. It now reads explicit || 'maplibre'.
The token is still honoured for what it is — with provider:'mapbox' it
authenticates the map, and the token argument stays in the signature because
callers pass one they hold outside the config. It simply no longer votes.
The migration surface is exactly one shape: a host that pasted a real token into
a published embed snippet and set no provider. All 36 shipped snippets carry a
tk placeholder and no provider key, so any host who filled one in is in it. An
unfilled snippet was already MapLibre, because hasMapToken rejects YOUR_
placeholders, and the DX Life branches pass no token at all. Such a host keeps
Mapbox by adding "provider":"mapbox"; ?provider= and window.MAP_PROVIDER are
unchanged.
The gate's four token-selects-Mapbox assertions were the old specification, so
they are inverted rather than deleted — the diff should show what changed for
whom. Two are added: the opt-in still works with a token in hand, which is the
path a migrating host takes, and a real token is still SEEN, asserted apart from
the engine because otherwise the engine could be right while authentication
broke silently.
check:map-props-unit was not in gates:pre, so it proved nothing on a normal run.
It is now, and the suite reads 32 of 32 with it named.
gospel landed 21ebb4f2 -- "Stop the ring legend pushing the centered-set
chart off the page" -- which is the same figure and the same legend I had
just added to the packet, so it was worth checking whether the print side
has the bug too.
It does not, and the reason is worth writing down rather than leaving as
arithmetic I happened to do once: a printed sheet is much taller than
their constrained screen pane. With ALL TEN rings named the column needs
~924px of a ~1715px page.
I wrote the assertion anyway and then deleted it, because mutation-testing
showed it only begins to fail at 51 legend rows -- and there are only ten
rings, so it could never fail for any input this code can produce. That is
a tautology dressed as a safety check, the same class as the "rows close
on the bottom margin" assertion already removed from check-profile-table:
a value compared against a bound it cannot reach reads as coverage and is
not.
What actually protects the layout is the empty-ring filter asserted just
above (ten rows is the hard ceiling) plus rega's rendered check. The
comment now says so, including the detail that gospel's fix leans on
overflow:auto and print has no scroll -- so if this page ever does get
tight, their remedy is not available here.
DRV1650-SR-POSTER-EXPORT, the "too much Antarctica" half. The big-poster renderer
stitches a grid of tiles, each drawn into an EQUAL-HEIGHT slot of the output image, and
it chose each row's latitude band by dividing the degree span evenly:
latStep = (ne.lat - sw.lat) / rows
Screen height is proportional to ln(tan(pi/4 + lat/2)), not to latitude, so equal DEGREE
bands are not equal SCREEN bands. MEASURED on a -60..75 view in 4 rows: the top band is
37.0% of the true rendered height and was being painted into 25% of the poster; the next
19.7% into 25%; the bottom 25.2% into 25%. Every row is squeezed or stretched, which is
the wrong aspect, and the bands where a degree buys the most pixels are the most
over-represented -- the Antarctica the Driver saw.
Sliced in Mercator y instead, every row is 25.0%, exactly, because that IS the screen
coordinate.
★ THIRD PLACE TODAY FOR THE SAME MISTAKE. A whiteboard chart nearly shipped with a linear
scale into degrees; a measurement harness nearly reported a false threshold by correcting
the wrong axis; and this has been shipping. Treating latitude as a screen coordinate is
the error, the conversion is one line, and it now lives in library/maps/mercator-slice.js
rather than being rediscovered a fourth time.
check-mercator-slice asserts the PROPERTY across five view/row combinations -- every band
an equal share of rendered height, contiguous, covering the span, north-first -- and its
CONTROL is the old code: degree-linear slicing must FAIL the same assertion, which it does
by 12.0 points. Without that control the test would pass on a tree where nothing changed.
A -90..90 view clamps at the Mercator limit instead of going infinite.
NOT FIXED HERE, because it is a product decision and not a defect: the export also asks
for an 8.5x11 PORTRAIT sheet (research-map.vue:1410), so a landscape map is letterboxed
onto a tall page. That is a deliberate default, it is the other half of the wrong vertical aspect, and changing the poster's default shape is a product decision, not a fix.
The agreed ring vocabulary now lives in two catalogues in eleven locales
each -- gospelInternet.json for the screen legend, packet-strings.json for
the printed sheet -- and nothing held them together. They legitimately
want different SHAPES (the screen renders the axes as standalone labels,
the packet composes them into one string per ring), so neither can import
the other; but the WORDS must match.
The failure that makes this worth a gate is quiet: one cell is provisional
on the Driver's row 89, and it appears in rings 1, 4 and 7. Answer it in
one file and not the other and the sheet and the screen state different
things about the same ring, each correct in isolation, with no error
anywhere. Only a reader holding both would notice.
Measuring first showed 36 of 77 cells already differed, in two classes.
Most were grammar -- the packet's culture terms follow a comma
mid-sentence, so they are lowercase -- but some were genuinely different
words: "Same family" against "Same language family", German "verwandte"
against "Nahe", Hindi "वही जन" against "वही जनसमूह". Those are drift, and
the screen's wording wins because it is what readers already see. The
packet now adopts every term verbatim, lowercasing only the first
character of the culture half, which is a no-op in zh/ar/hi and leaves
German common nouns capitalised.
That adoption caught a bug in my own assertion: I had hardcoded ring 7-9
as "Same family" from CenteredSetTarget.vue's header, while the shipping
string is "Same language family". A summary in a comment is a description
of the data, never a second source of it.
The gate also refuses to pass when it compared nothing -- rename a key on
either side and every lookup returns undefined, every pair is skipped, and
a silent check reports success. Mutation-tested both ways: answering row
89 on the screen only, and renaming a packet key.
The figure printed rings without saying what they mean -- honest but thin.
It now names each one with the vocabulary gospel and exp settled, the same
words the screen legend renders, so a printed sheet cannot disagree with
the screen.
COMPOSED FROM band x culture, NOT A FLAT 1..10 TABLE, and that is the
whole design decision. "Same people" in column 1 is provisional on the
Driver's row 89 -- and it appears in rings 1, 4 AND 7. A ten-string table
would need three edits kept in step, which is exactly how two of them end
up saying different things. Composed, it is one string
(ring_culture_same), and if he picks "culture" the ring numbering, the
columns and the colours are all untouched.
Ring 10 stands alone ("Nearby only") because it is not a band-and-culture
reading at all -- it is what is left when no linguistic relation was
found. The gate asserts that separately, and a mutant that composes it
like the other nine fails.
ONLY THE RINGS THAT HOLD SOMEONE. Ten rows of vocabulary beside a figure
is a glossary, not a legend, and a named ring with no dot on it invites
the reader to hunt for something that is not there. ringTally's per-ring
counts drive the list, so it states what this zone actually contains.
Mutation-tested: a wrong band order, listing all ten rings regardless of
count, and composing ring 10 like the others each fail with their own
message. Eight new strings x eleven locales; packet-strings-parity green.
Brief A1 back matter: after the profiles, before the wheel, full detail
only. The lightweight packet is map, triangle, profiles, wheel, points --
these two figures are the part a reader sits with rather than carries.
The layouts are regions' library/components/charts modules, imported
rather than injected: unlike describeGroup's country resolver they have
zero imports and run under plain node, and packet-render already imports
scatterCells from that directory. Verified by importing and CALLING them,
not by reading them. They return data, so the SVG is ours.
Gospel's non-negotiable is carried through and checked rather than
trusted: the bounded set keeps a deliberate gap either side of the
boundary because a dot ON the line is the one thing a bounded set cannot
express, and print has no hover to disambiguate it. Measured on the real
module with 40 groups -- inside max 85.3 of 92 allowed, outside min 119.8
of 112 required. The figure scales through the viewBox, so the gap lives
in coordinates the scaling cannot touch; shrink the figure, never the gap.
UNKNOWN POINTS ARE STATED, NOT PLOTTED. layoutBoundedSet gives them no
x/y, which is the module being right: `reached` undefined means we do not
know which side they belong on, so there is no honest place to draw them.
My first version mapped them through the same dot() helper and crashed on
p.x.toFixed -- a better outcome than silently drawing them at (0,0), which
would have put "we don't know" inside the circle. They go in the tally,
because on a printed page a category the reader cannot see reads as zero.
check-packet-variants' sheet delta goes 2 -> 3, updated in this commit
rather than relaxed into a range. It also now SUPPLIES the sets fixture:
setsPage returns '' without data, so a build() that omitted `sets`
exercised the filter for every page except the newest one, and the gate
sat green through the whole rewrite while asserting a delta that had
become wrong. A fixture missing an input silently narrows what the whole
file covers.
Seven strings x eleven locales; packet-strings-parity green. Gospel's own
ring names live in gospelInternet.json, a plugin catalogue, so there is no
collision with these.
It captured defineCustomElement only in plugin entry files; since the entries build their element
through library/elements/defineMapElement.js, it recorded nothing and refused every composite as
'defines neither this component nor ProfileLoader'.
The element-bootstrap migration called defineMapElement in eleven entry files that never
imported it. A build does not fail on an unbound name; the element does, the moment it loads,
with 'defineMapElement is not defined'. The landing precondition caught it by importing each
profile. check:element-bootstrap now fails when an entry calls the helper without importing it.
